Owner's Manual

PRE-OPERATION CHECKS
4-3
4
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-16, 6-27
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-26
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-17, 6-19
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-27
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-28
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-28
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-13
ITEM CHECKS PAGE
U5PX13E0.book Page 3 Monday, May 10, 2004 9:26 AM