Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-9
3
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts, and then pull
the seat up.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, place the seat in the
original position, and then install
the bolts.
2. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
EAU14190
Seats (XVS650A/AT)
Passenger seat
To remove the passenger seat
Remove the bolt, and then pull the pas-
senger seat up.
To install the passenger seat
Insert the projections on the front of the
passenger seat into the holders as
shown, place the seat in the original po-
sition, and then install the bolt.
1. Bolt
2. Seat holder
3. Projection
1. Seat bracket
2. Projection
1. Bolt
5FB13.book Page 9 Monday, May 12, 2003 5:20 PM