OWNER’S MANUAL XVZ13TFS(C) XVZ13TFMS(C) YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2003.05-0.
4XY15.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM INTRODUCTION EAU10080 Congratulations on your purchase of the Yamaha Royal Star™ VENTURE®. This model is the result of Yamaha’s vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle.
XY15.book Page 1 Monday, May 19, 2003 5:24 PM IMPORTANT MANUAL INFORMATION EAU10130 Particularly important information is distinguished in this manual by the following notations: The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! WARNING Failure to follow WARNING instructions could result in severe injury or death to the motorcycle operator, a bystander or a person inspecting or repairing the motorcycle.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM IMPORTANT MANUAL INFORMATION EAU10192 AFFIX DEALER LABEL HERE XVZ13TFS(C)/XVZ13TFMS(C) OWNER’S MANUAL ©2003 by Yamaha Motor Corporation, U.S.A. 1st edition, May 2003 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM TABLE OF CONTENTS SAFETY INFORMATION ..................1-1 Location of important labels ............1-5 DESCRIPTION ..................................2-1 Left view ..........................................2-1 Right view ........................................2-2 Controls and instruments.................2-3 INSTRUMENT AND CONTROL FUNCTIONS .......................................3-1 Main switch/steering lock ................3-1 Indicator and warning lights ...
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM TABLE OF CONTENTS Adjusting the rear brake light switch ........................................7-24 Checking the front and rear brake pads ..........................................7-24 Checking the brake and clutch fluid levels .................................7-25 Changing the brake and clutch fluids ..........................................7-26 Checking and lubricating the cables ........................................
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM SAFETY INFORMATION EAU10250 1 MOTORCYCLES ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE OF THE OPERATOR. EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS BEFORE RIDING THIS MOTORCYCLE. HE OR SHE SHOULD: ● OBTAIN THOROUGH INSTRUCTIONS FROM A COMPETENT SOURCE ON ALL ASPECTS OF MOTORCYCLE OPERATION.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM SAFETY INFORMATION ● ● wide on a turn due to EXCESSIVE SPEED or undercornering (insufficient lean angle for the speed). • Always obey the speed limit and never travel faster than warranted by road and traffic conditions. • Always signal before turning or changing lanes. Make sure that other motorists can see you. The posture of the operator and passenger is important for proper control.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM SAFETY INFORMATION 1 Loading The total weight of the operator, passenger, accessories and cargo must not exceed the maximum load limit of 190 kg (419 lb). When loading within this weight limit, keep the following in mind: ● Cargo and accessory weight should be kept as low and close to the motorcycle as possible. Make sure to distribute the weight as evenly as possible on both sides of the motorcycle to minimize imbalance or instability.
4XY15.book Page 4 Monday, May 19, 2003 5:24 PM SAFETY INFORMATION Gasoline and exhaust gas ● GASOLINE IS HIGHLY FLAMMABLE: • Always turn the engine off when refueling. • Take care not to spill any gasoline on the engine or exhaust system when refueling. • Never refuel while smoking or in the vicinity of an open flame. ● Never start the engine or let it run for any length of time in a closed area. The exhaust fumes are poisonous and may cause loss of consciousness and death within a short time.
4XY15.book Page 5 Monday, May 19, 2003 5:24 PM SAFETY INFORMATION EAU10381 Location of important labels Please read the following important labels carefully before operating this vehicle.
4XY15.book Page 6 Monday, May 19, 2003 5:24 PM SAFETY INFORMATION 1 2 CAUTION Cleaning with alkaline or acid cleaner, gasoline or solvent will damage windshield. Use neutral detergent.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM DESCRIPTION EAU10410 Left view 2 1. 2. 3. 4. 5. 6. 7. 8. Side case (page 3-14) 9. Helmet holder (page 3-14) 10.Tail/brake light (page 7-34) 11.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM DESCRIPTION EAU10420 Right view 2 1. 2. 3. 4. 5. 6. 7. 8. 9. Front fork air valve (page 3-16) 10.Headlight (page 7-33) 11.Front turn signal/position lights (page 7-34) 12.Fuse box 1 (page 7-31) 13.Brake pedal (page 3-9) 14.Rider footrest 15.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM DESCRIPTION EAU10430 Controls and instruments 2 1. 2. 3. 4. 5. 6. 7. 8. 9.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU10460 Main switch/steering lock EAU10680 LOCK The steering is locked, and all electrical systems are off. The key can be removed. To unlock the steering To lock the steering 3 1. Push. 2. Turn. The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering. The various positions are described below.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU10950 3 ACC (Accessory) The audio system and the auxiliary DC jack and terminals can be used in this position. Therefore, do not use the accessory position for an extended period of time, otherwise the battery may discharge. The key cannot be removed. EAU11001 Indicator and warning lights 1. 2. 3. 4. 5. 6.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU11080 EAU11270 High beam indicator light “ ” This indicator light comes on when the high beam of the headlight is switched on. Fuel level warning light “ ” This warning light comes on when the fuel level drops below approximately 3.5 L (0.92 US gal) (0.77 Imp.gal). When this occurs, turn the fuel cock lever to the “RES” position and refuel as soon as possible.
4XY15.book Page 4 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU11760 Speedometer unit 3 1. 2. 3. 4.
4XY15.book Page 5 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS 5. Push the “SELECT” button to start the clock. EAU11840 Cruise control system NOTE: After setting the clock, be sure to push the “SELECT” button before turning the key to “OFF”, otherwise the clock will not be set. 3 1. Cruise control switch 2. “CANCEL” switch 1. “CRUISE” switch This model is equipped with a cruise control system designed to maintain a set traveling speed.
4XY15.book Page 6 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS grip is released. However, if the speed is increased by more than 8 km/h (5 mi/h), the cruise control system will be deactivated until the traveling speed is within 8 km/h (5 mi/h) of the set speed. then go off. Once the cruise control system is reactivated, the “SET” indicator light will come on. Push the “CRUISE” switch to the right to turn the cruise control system off completely. EWA11070 3 1. “SET” indicator light 2.
4XY15.book Page 7 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU12160 Fuel gauge EAU12341 Handlebar switches Right Left 3 1. Fuel gauge The fuel gauge indicates the amount of fuel in the fuel tank. The display segments of the fuel gauge disappear towards “E” (Empty) as the fuel level decreases. When only one segment is left near “E”, refuel as soon as possible. 1. 2. 3. 4.
4XY15.book Page 8 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS leased, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position. EAU12500 Horn switch “ ” Press this switch to sound the horn. 3 EAU12660 Engine stop switch “ / ” Set this switch to “ ” before starting the engine.
4XY15.book Page 9 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU12880 Shift pedal EAU12890 Brake lever EAU12941 Brake pedal 3 1. Shift pedal 1. Brake lever 1. Brake pedal The shift pedal is located on the left side of the engine and is used in combination with the clutch lever when shifting the gears of the 5-speed constant-mesh transmission equipped on this motorcycle. The brake lever is located at the right handlebar grip.
4XY15.book Page 10 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU13120 Fuel tank cap EAU13210 NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. Fuel EWA10130 WARNING 3 Make sure that the fuel tank cap is properly installed before riding. 1. Fuel tank cap lock cover 2. Unlock. 1. Fuel tank filler tube 2. Fuel level Make sure that there is sufficient fuel in the tank.
4XY15.book Page 11 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS ECA10070 CAUTION: Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts. EAU13300 Recommended fuel: UNLEADED GASOLINE ONLY Fuel tank capacity: 22.5 L (5.94 US gal) (4.95 Imp.gal) Fuel reserve amount: 3.5 L (0.92 US gal) (0.77 Imp.gal) knocking (or pinging) occurs, use a gasoline of a different brand or premium unleaded fuel.
4XY15.book Page 12 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS ON This indicates reserve. With the fuel cock lever in this position, the fuel reserve is made available. Turn the fuel cock lever to this position if you run out of fuel while riding. When this occurs, refuel as soon as possible and be sure to turn the fuel cock lever back to “ON”! EAU13600 Starter (choke) knob “ ” 3 With the fuel cock lever in this position, fuel flows to the carburetors.
4XY15.book Page 13 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU13780 Locking the steering with a padlock EAU14240 Rider seat To remove the rider seat Remove the nuts, and then pull the rider seat up. 3 1. Nut In addition to the main switch/steering lock, there are brackets on the right side of the steering head pipe for locking the steering with a padlock.
4XY15.book Page 14 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU14360 Helmet holders To close a helmet holder Place the helmet holder in the original position, and then remove the key. EWA11040 WARNING Never ride with a helmet attached to a helmet holder, since the helmet may hit objects, causing loss of control and possibly an accident. 3 1. Helmet holder (right) 2. Unlock. 1. Helmet holder (left) 2. Unlock.
4XY15.book Page 15 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS er conditions may make it necessary to further reduce the riding speed. Side cases To open a side case 1. Insert the key into the lock, turn it counterclockwise, and then push it in. 3 1. Storage compartment 2. Storage pouch To close a side case 1. Fold the side case lid down. 2. Turn the key clockwise, and then remove it. 1. Travel trunk lock 2. Unlock. 2.
4XY15.book Page 16 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS ECA10910 EAU14650 CAUTION: Adjusting the front fork Do not apply excessive pressure on the travel trunk lid when it is open. This front fork is equipped with air valves for adjusting the spring rate. EWA10180 WARNING 3 To close the travel trunk 1. Fold the travel trunk lid up completely, and then fold it down. Always adjust both fork legs equally, otherwise poor handling and loss of stability may result. 2.
4XY15.book Page 17 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS 3. Check the air pressure in each fork leg with the air pressure gauge included in the owner’s tool kit. 4. To increase the spring rate and thereby harden the suspension, increase the air pressure with an air pump. To decrease the spring rate and thereby soften the suspension, decrease the air pressure by pushing each valve stem down.
4XY15.book Page 18 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU15290 3 Spring rate: Minimum (soft): Air pressure = 0 kPa (0 kgf/cm², 0 psi) Standard: Air pressure = 0 kPa (0 kgf/cm², 0 psi) Maximum (hard): Air pressure = 400 kPa (4.0 kgf/cm², 57 psi) ECA11090 CAUTION: Locks for the optional side cases and travel trunk There are three locks in a plastic bag located beside the owner’s tool kit.
4XY15.book Page 19 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS below and have a Yamaha dealer repair it if it does not function properly. EAU15311 Ignition circuit cut-off system The ignition circuit cut-off system (comprising the sidestand switch, clutch switch and neutral switch) has the following functions. ● It prevents starting when the transmission is in gear and the sidestand is up, but the clutch lever is not pulled.
4XY15.book Page 20 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS With the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is turned on. 3. Turn the key on. 4. Shift the transmission into the neutral position. 5. Push the start switch. Does the engine start? NOTE: This check is most reliable if performed with a warmed-up engine. 3 YES NO The neutral switch may be defective. The motorcycle should not be ridden until checked by a Yamaha dealer.
4XY15.book Page 21 Monday, May 19, 2003 5:24 PM INSTRUMENT AND CONTROL FUNCTIONS EAU15411 Auxiliary DC jack and terminals 12-V accessories connected to the auxiliary DC jack at the front and auxiliary DC terminals under the rider seat can be used when the key is in the “ACC” or “ON” position. ECA11030 CAUTION: 1.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO EAU15440 Location of parts 4 1. 2. 3. 4. 5. 6. Audio system/CB radio control unit Front speaker Rider headset jack Cassette deck lid Main switch/steering lock Eject (“ ”) button 7. Cassette deck compartment 8. Auxiliary audio input jack 9. Rear speaker 10.Passenger volume control knob 11.Passenger “TALK” button 12.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO EWA11370 ● ● EAU15450 Headsets (optional) WARNING It is dangerous to operate the audio system controls while riding. Never take your hands off the handlebars while riding. Keep the volume at a low enough level to be aware of traffic conditions and ensure safety. 4 ECA11750 CAUTION: ● ● ● Do not use the audio system or CB radio for a long period of time when the engine is not running as the battery may discharge.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO EAU15462 Control unit 4 1. 2. 3. 4. 5. Volume control knob Up/down (“ ”) switch Audio system button “AUDIO” Selection button “SELECT” CB radio button “CB” Volume control knob This knob adjusts the audio system volume, the CB radio reception volume, and the CB squelch level. Up/down (“ ”) switch This switch is used to perform the following operations.
4XY15.book Page 4 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Audio system SP/HS (Output) BASS TREB (Treble) FAD (Fade1) Long push (one second or more) ● Turning off the CB radio EAU15480 Making basic settings Turning on/off the audio system Radio frequency 2 AV (Auto volume) IC (Intercom volume) 1 This mode does not appear in the display when 2 the headsets are selected as the output.
4XY15.book Page 5 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO 4 Adjusting the audio system volume Turning on/off the CB radio Turn the volume control knob until the desired audio system volume is displayed (e.g., “Vo:10”). The audio system volume can be set between “0” and “30”. After the adjustment is made, the audio system returns to normal operation and the current audio mode appears in the display. 1. CB radio indicator light To turn the power on 1.
4XY15.book Page 6 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO EAU15502 Making mode settings Audio system SP/HS (Output) General procedure The following setting procedure applies to the audio system, CB radio, and optional CD changer. NOTE: ● In order to make settings in any of the audio system modes, make sure that the audio system is selected. If necessary, push the “AUDIO” button for less than one second.
4XY15.book Page 7 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Adjusting the bass level 4 1. Repeatedly push the “SELECT” button for less than one second until “BASS” appears at the bottom of the display. 2. Repeatedly push either side of the up/down switch for less than one second until the desired level is displayed. The bass level can be set between “-6” and “+6”. Adjusting the treble level 1.
4XY15.book Page 8 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO NOTE: When the fade level is set to “0”, the front and rear speaker levels are the same. Adjusting the auto volume Turning on/off the CB roger beep Adjusting the intercom volume 1. Repeatedly push the “SELECT” button for less than one second until the intercom volume (e.g., “IC:10”) appears in the display. 2. Repeatedly push either side of the up/down switch for less than one second until the desired volume is displayed.
4XY15.book Page 9 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO EAU15520 EWA11380 Cassette deck operation WARNING ● ● It is dangerous to operate the cassette deck while riding. Never take your hands off the handlebars while riding. Keep the volume at a low enough level to be aware of traffic conditions and ensure safety. 4 ● To clean the tape head, use a de-magnetizing cleaning cassette, but be sure to turn the volume all the way down to avoid speaker damage.
4XY15.book Page 10 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Skipping songs While a cassette tape is playing, push either side of the up/down switch once for less than one second for each song to be skipped. Pushing “ ” skips songs in the forward direction. Pushing “ ” skips songs in the reverse direction. “APC” (auto program control) and the number of songs to be skipped (e.g., “3”) appear in the display.
4XY15.book Page 11 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Turning on/off the Dolby noise reduction system 4 Ejecting the cassette tape 1. Eject (“ EAU15532 Radio operation ”) button 1. Radio antenna While the cassette tape is playing, push the eject (“ ”) button for more than two seconds to turn the Dolby B noise reduction system on or off. “B NR” appears in the display when the noise reduction system is turned on.
4XY15.book Page 12 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO EWA11390 Selecting a frequency band WARNING ● ● ● It is dangerous to operate the radio while riding. Never take your hands off the handlebars while riding. Keep the volume at a low enough level to be aware of traffic conditions and ensure safety. Never ride the motorcycle with the radio antenna folded down. NOTE: ● The antenna can be folded down after lifting the sleeve.
4XY15.book Page 13 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO tunes in the first station that has a strong enough signal to be received. Tuning in a radio station manually played. The frequency changes in 0.2-MHz steps for FM and in 10kHz steps for AM. Programing preset radio stations manually Tuning in a preset radio station 4 In order to tune in a particular radio station (e.g., when the signal is too weak for automatic tuning), the radio frequency can be selected manually as follows. 1.
4XY15.book Page 14 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO 3. Repeatedly push either side of the up/down switch for less than one second until the desired preset number (“1” through “6”) is displayed. NOTE: Selecting “A” will automatically program the preset stations. See the following section. 4. Push the “SELECT” button once for less than one second to store the radio station selected in step 1 under the preset number selected in step 3. 5.
4XY15.book Page 15 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO 4. Push the “SELECT” button once for less than one second to program preset radio stations automatically. EAU15540 Optional CD changer operation EWA11400 WARNING ● ● 4 It is dangerous to operate the CD changer while riding. Never take your hands off the handlebars while riding. Keep the volume at a low enough level to be aware of traffic conditions and ensure safety. 1. Insert up to six CDs into the CD changer.
4XY15.book Page 16 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Selecting a CD track Repeatedly push either side of the up/down switch for less than one second until the number for the desired CD track appears in the display. EAU15550 EWA11410 CB radio operation WARNING ● ● ● 1. CB antenna It is dangerous to change CB radio channels or adjust the volume while riding. Never take your hands off the handlebars while riding.
4XY15.book Page 17 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO 4 The Citizens Band Radio Service is under the jurisdiction of the Federal Communications Commission (F.C.C.). Any adjustments or modifications which would alter the performance of the transceiver’s original F.C.C. Type Acceptance or which would change the frequency-determining method are strictly prohibited.
4XY15.book Page 18 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Adjusting the squelch level The squelch is a noise suppresser designed to reduce or eliminate background noise in the absence of an incoming signal. The squelch level can be adjusted as follows. 1. Push the “CB” button once for less than one second. The squelch level appears in the display (e.g., “SQ:10”). 2.
4XY15.book Page 19 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Channel information 4 Channel Channel Frequency in MHz Channel Channel Frequency in MHz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 26.965 26.975 36.985 27.005 27.015 27.025 27.035 27.055 27.065 27.075 27.085 27.105 27.115 27.125 27.135 27.155 27.165 27.175 27.185 27.205 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 27.215 27.225 27.235 27.245 27.255 27.265 27.275 27.285 27.295 27.305 27.315 27.325 27.
4XY15.book Page 20 Monday, May 19, 2003 5:24 PM AUDIO SYSTEM AND CB RADIO Transmitting and receiving EAU15570 Auxiliary audio source operation Transmission Auxiliary audio equipment can be connected to, and played through, the audio system. 1. Insert the output plug of the auxiliary equipment into the jack located at the right of the cassette deck. 1. Passenger “TALK” button Push the rider “TALK” switch or the passenger “TALK” button to transmit. “TX” appears in the display.
4XY15.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM PRE-OPERATION CHECKS EAU15591 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences. Therefore, it is very important, in addition to a thorough visual inspection, to check the following points before each ride.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM PRE-OPERATION CHECKS EAU15601 Pre-operation check list ITEM CHECKS PAGE Fuel • Check fuel level in fuel tank. • Refuel if necessary. • Check fuel line for leakage. 3-10 Engine oil • Check oil level in engine. • If necessary, add recommended oil to specified level. • Check vehicle for oil leakage. 7-12 Final gear oil • Check vehicle for oil leakage. 7-15 Coolant • Check coolant level in reservoir.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM PRE-OPERATION CHECKS ITEM CHECKS Check operation. If soft or spongy, have Yamaha dealer bleed hydraulic system. Check fluid level in reservoir. If necessary, add recommended fluid to specified level. Check hydraulic system for leakage. PAGE Clutch • • • • • Throttle grip • Make sure that operation is smooth. • Check cable free play. • If necessary, have Yamaha dealer adjust cable free play and lubricate cable and grip housing.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM OPERATION AND IMPORTANT RIDING POINTS EAU15950 EWA10270 WARNING ● ● 6 ● Become thoroughly familiar with all operating controls and their functions before riding. Consult a Yamaha dealer regarding any control or function that you do not thoroughly understand. Never start the engine or operate it in a closed area for any length of time. Exhaust fumes are poisonous, and inhaling them can cause loss of consciousness and death within a short time.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM OPERATION AND IMPORTANT RIDING POINTS ECA10930 CAUTION: The engine trouble warning light should come on when the start switch is pushed, and it should go off when the start switch is released. If the engine trouble warning does not come on when pushing the start switch, or it remains on after starting, have a Yamaha dealer check the self-diagnosis device. er than necessary. The time necessary for starter (choke) use depends upon the ambient temperature.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM OPERATION AND IMPORTANT RIDING POINTS EAU16671 Shifting ECA10260 CAUTION: ● 1. Shift pedal 2. Neutral position 6 Shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc. The gear positions are shown in the illustration. ● Even with the transmission in the neutral position, do not coast for long periods of time with the engine off, and do not tow the motorcycle for long distances.
4XY15.book Page 4 Monday, May 19, 2003 5:24 PM OPERATION AND IMPORTANT RIDING POINTS 3. Shift the transmission into the neutral position when the motorcycle is almost completely stopped. The neutral indicator light should come on. EAU16720 Recommended shift points The recommended shift points during acceleration and deceleration are shown in the table below.
4XY15.book Page 5 Monday, May 19, 2003 5:24 PM OPERATION AND IMPORTANT RIDING POINTS EAU17170 Parking When parking, stop the engine, remove the key from the main switch, and then turn the fuel cock lever to “OFF”. EWA10310 WARNING ● ● Since the engine and exhaust system can become very hot, park in a place where pedestrians or children are not likely to touch them. Do not park on a slope or on soft ground, otherwise the vehicle may overturn.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU17231 EAU17300 PERIODIC MAINTENANCE Safety is an obligation of the owner. Periodic inspection, adjustment and lubrication will keep your vehicle in the safest and most efficient condition possible. The most important points of motorcycle inspection, adjustment, and lubrication are explained on the following pages.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EWA10340 WARNING Modifications not approved by Yamaha may cause loss of performance, excessive emissions, and render the vehicle unsafe for use. Consult a Yamaha dealer before attempting any changes.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU17600 Periodic maintenance chart for the emission control system INITIAL No. ITEM ROUTINE 1 * Fuel line • Check fuel hoses for cracks or damage. • Replace if necessary. 2 * Fuel filter • Replace. 3 Spark plugs • Check condition. • Adjust gap and clean. • Replace every 8000 mi (13000 km) or 12 months. 4 * Valve clearance • Check and adjust valve clearance when engine is cold.
4XY15.book Page 4 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU32181 General maintenance and lubrication chart INITIAL No. 7 ITEM ROUTINE 1 * Air filter element • Clean with compressed air. • Replace if necessary. 2 * Clutch • Check operation and fluid leakage. • Correct if necessary.
4XY15.book Page 5 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL No. ITEM ROUTINE Swingarm pivot bearings • Check bearing assemblies for looseness. • Moderately repack with lithiumsoap-based grease. 10 * Steering bearings • Check bearing assembly for looseness. • Moderately repack with lithiumsoap-based grease every 16000 mi (25000 km) or 24 months.
4XY15.book Page 6 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL No. ITEM 18 * Engine oil filter cartridge 19 * Cooling system ROUTINE • Replace. 600 mi (1000 km) or 1 month ODOMETER READINGS 4000 mi (7000 km) or 6 months √ • Check hoses for cracks or damage. • Replace if necessary.
4XY15.book Page 7 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR ● Hydraulic brake and clutch systems • After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required. • Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
4XY15.book Page 8 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU18710 Removing and installing cowlings and panels The cowlings and panels shown above need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a cowling or panel needs to be removed and installed. EAU18831 Cowling A 1. Cowling A 2. Panel A To remove the cowling Remove the screws and the quick fastener, and then pull the cowling off as shown. 1.
4XY15.book Page 9 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR 2. Remove the screws, and then pull the cowling off as shown. NOTE: Make sure that the projection fits into the grommet. 2. Install cowling A. EAU19292 Panels A and B To remove one of the panels Remove the screw, and then pull the panel off as shown. 1. Grommet 2. Projection 3. Cowling A 1. Cowling B 2. Screw NOTE: ● Make sure that the projection fits into the grommet.
4XY15.book Page 10 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR 1. Panel B 2. Screw To install the panel Place the panel in the original position, and then install the screw. 7 EAU19332 Panel C To remove the panel 1. Remove the left passenger footrest by removing the bolts. 2. Remove the screw, and then pull the panel off as shown. 1. Panel C 2. Screw 3. Bolt To install the panel 1. Place the panel in the original position, and then install the screw. 2.
4XY15.book Page 11 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR 3. Check each spark plug for electrode erosion and excessive carbon or other deposits, and replace it if necessary. EAU19543 Checking the spark plugs The spark plugs are important engine components, which are easy to check. Since heat and deposits will cause any spark plug to slowly erode, the spark plugs should be removed and checked in accordance with the periodic maintenance and lubrication chart.
4XY15.book Page 12 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR 2. Clean the surface of the spark plug gasket and its mating surface, and then wipe off any grime from the spark plug threads. 3. Install the spark plug with the spark plug wrench, and then tighten it to the specified torque. EAU19671 Canister (for California only) The engine oil level should be checked before each ride.
4XY15.book Page 13 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: The engine oil should be between the minimum and maximum level marks. 2. Place an oil pan under the engine to collect the used oil. 3. Remove the engine oil filler cap and drain bolt to drain the oil from the crankcase. 1. Engine oil drain bolt 1. Engine oil level check window 2. Maximum level mark 3. Minimum level mark 4.
4XY15.book Page 14 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: Make sure that the O-ring is properly seated. 6. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. ● Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 8. Add the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 9-1.
4XY15.book Page 15 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU20030 Final gear oil EAU20070 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAU20210 1. Final gear oil filler bolt 2. Final gear oil drain bolt To check the coolant level 1. Place the vehicle on a level surface and hold it in an upright position. 2. Remove panel A. (See page 7-8.
4XY15.book Page 16 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR ● If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced. EWA10380 WARNING Never attempt to remove the radiator cap when the engine is hot. 1. Coolant reservoir cap Coolant reservoir capacity: 0.84 L (0.89 US qt) (0.74 Imp.
4XY15.book Page 17 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR 7. Install the air filter element by fitting the projection on the air filter element into the holder in the air filter case, then tightening the screws. 3. Loosen the air filter joint clamp screw, and then pull the air filter off. ECA10480 CAUTION: ● 1. Air filter element 2. Screw 1. Air filter joint clamp screw 4. Remove the air filter case cover by removing the bolts. ● 6.
4XY15.book Page 18 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU21270 Adjusting the carburetors The carburetors are important parts of the engine and emission control system, which require very sophisticated adjustment. Therefore, all carburetor adjustments should be left to a Yamaha dealer, who has the necessary professional knowledge and experience. EAU21380 Adjusting the throttle cable free play 1. Air filter case drain hose 1.
4XY15.book Page 19 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU21400 EAU32541 Adjusting the valve clearance Tires The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart.
4XY15.book Page 20 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR LOAD YOUR VEHICLE. Make sure that the total weight of the cargo, rider, passenger, and accessories (cowling, saddlebags, etc. if approved for this model) does not exceed the maximum load of the vehicle. Operation of an overloaded vehicle could cause tire damage, an accident, or even injury. Tire inspection 7 in it, or if the sidewall is cracked, contact a Yamaha dealer immediately and have the tire replaced.
4XY15.book Page 21 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU21990 Cast wheels To maximize the performance, durability, and safe operation of your motorcycle, note the following points regarding the specified wheels. ● The wheel rims should be checked for cracks, bends, warpage or damage before each ride. If any damage is found, have a Yamaha dealer replace the wheel. Do not attempt even the smallest repair to the wheel. A deformed or cracked wheel must be replaced.
4XY15.book Page 22 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR any consequences caused by the use of items which have not been approved by Yamaha. EAU22071 Clutch lever free play EAU22091 Adjusting the brake lever free play 1. Clutch lever free play 7 Since this model is equipped with a hydraulic clutch, adjusting the clutch lever free play is not needed. However, it is necessary to check the clutch fluid level and check the hydraulic system for leakage before each ride.
4XY15.book Page 23 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EWA10630 WARNING ● ● After adjusting the brake lever free play, check the free play and make sure that the brake is working properly. A soft or spongy feeling in the brake lever can indicate the presence of air in the hydraulic system. If there is air in the hydraulic system, have a Yamaha dealer bleed the system before operating the motorcycle.
4XY15.book Page 24 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR Adjusting the rear brake light switch Checking the front and rear brake pads indicator grooves have almost disappeared, have a Yamaha dealer replace the brake pads as a set. The rear brake light switch, which is activated by the brake pedal, is properly adjusted when the brake light comes on just before braking takes effect.
4XY15.book Page 25 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU22660 Checking the brake and clutch fluid levels ● Clutch Front brake Use only the recommended quality brake fluid, otherwise the rubber seals may deteriorate, causing leakage and poor braking or clutch performance. Recommended brake and clutch fluid: DOT 4 brake fluid 1. Minimum level mark 1. Minimum level mark Rear brake 1.
4XY15.book Page 26 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR brake fluid level goes down suddenly, have a Yamaha dealer check the cause. EAU22750 EAU23090 Changing the brake and clutch fluids Checking and lubricating the cables Have a Yamaha dealer change the brake and clutch fluids at the intervals specified in the NOTE after the periodic maintenance and lubrication chart.
4XY15.book Page 27 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23110 Checking and lubricating the throttle grip and cable EAU23131 Checking and lubricating the brake and shift pedals Recommended lubricant: Lithium-soap-based grease (all-purpose grease) The operation of the throttle grip should be checked before each ride. In addition, the cable should be lubricated or replaced at the intervals specified in the periodic maintenance chart.
4XY15.book Page 28 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23140 Checking and lubricating the brake and clutch levers EAU23200 Checking and lubricating the sidestand EAU23271 Checking the front fork The condition and operation of the front fork must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the condition EWA10750 WARNING Securely support the vehicle so that there is no danger of it falling over.
4XY15.book Page 29 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23280 Checking the steering ECA10590 Worn or loose steering bearings may cause danger. Therefore, the operation of the steering must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Place a stand under the engine to raise the front wheel off the ground.
4XY15.book Page 30 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23290 Checking the wheel bearings EAU23370 EWA10760 Battery WARNING The front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrication chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a Yamaha dealer check the wheel bearings. ● 1. Battery 2. Negative battery terminal 3.
4XY15.book Page 31 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR ● KEEP THIS AND ALL BATTERIES OUT OF THE REACH OF CHILDREN. To charge the battery Have a Yamaha dealer charge the battery as soon as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more quickly if the vehicle is equipped with optional electrical accessories. To store the battery 1.
4XY15.book Page 32 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR If a fuse is blown, replace it as follows. 1. Turn the key to “OFF” and turn off the electrical circuit in question. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. 1. 2. 3. 4. 5. 6. 7 Odometer and clock fuse (backup) Radiator fan fuse Headlight fuse Signaling system fuse Ignition fuse Spare fuse Fuse box 2 is located behind panel B. (See page 7-8.) 1. Main fuse 2.
4XY15.book Page 33 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. EAU23770 Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. 1. Disconnect the headlight coupler, and then remove the headlight bulb cover. 1. Headlight bulb holder EWA10790 WARNING 1. Headlight bulb cover 2. Headlight coupler 2.
4XY15.book Page 34 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU24281 Replacing a turn signal light bulb or the tail/brake light bulb 1. Remove the lens by removing the screws. 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 CAUTION: Do not overtighten the screws, otherwise the lens may break.
4XY15.book Page 35 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR a jack either under each side of the frame in front of the rear wheel or under each side of the swingarm. EAU25870 Troubleshooting Although Yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur during operation. Any problem in the fuel, compression, or ignition systems, for example, can cause poor starting and loss of power.
4XY15.book Page 36 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU25911 Troubleshooting charts Starting problems or poor engine performance EWA10840 WARNING Keep away open flames and do not smoke while checking or working on the fuel system. 1. Fuel There is enough fuel. Check the compression. There is no fuel. Supply fuel. There is compression. Check the ignition. There is no compression. Have a Yamaha dealer check the vehicle. Check the fuel level in the fuel tank.
4XY15.book Page 37 Monday, May 19, 2003 5:24 PM PERIODIC MAINTENANCE AND MINOR REPAIR Engine overheating EWA10400 WARNING ● ● Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM MOTORCYCLE CARE AND STORAGE EAU26120 Cleaning Frequent, thorough cleaning of your motorcycle not only enhances its appearance, but also improves its performance and extends its life. ECA10730 CAUTION: ● ● 8 Improper cleaning can damage the windshield, cowlings, panels and other plastic parts. Use only a soft, clean cloth or sponge with mild detergent and water to clean plastic.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM MOTORCYCLE CARE AND STORAGE or another high-quality windshield cleaner. Some cleaning compounds for plastics may leave scratches on the windshield. Before using such cleaners, test an area of the windshield which does not affect your visibility and which cannot be easily recognized. After cleaning the motorcycle Apply Yamaha Silicone Wax or another high-quality automotive-type wax on all painted and chrome-plated surfaces.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM MOTORCYCLE CARE AND STORAGE 6. If storing in a humid or salt-air atmosphere, coat all exposed metal surfaces with a light film of oil. Do not apply oil to any rubber parts or the seat cover. 7. Remove the battery and fully charge it. Store it in a cool, dry place and charge it once a month. Do not store the battery in an excessively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)].
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM SPECIFICATIONS Dimensions: Overall length: 2655 mm (104.5 in) Overall width: 900 mm (35.4 in) Overall height: 1565 mm (61.6 in) Seat height: 750 mm (29.5 in) Wheelbase: 1705 mm (67.1 in) Ground clearance: 155 mm (6.10 in) Minimum turning radius: 3500 mm (137.8 in) Weight: With oil and fuel: 394.0 kg (869 lb) Engine: Engine type: Liquid cooled 4-stroke, DOHC Cylinder arrangement: V-type 4-cylinder Displacement: 1294.0 cm³ (78.96 cu.in) Bore × stroke: 79.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM SPECIFICATIONS Transmission type: Constant mesh 5-speed Operation: Left foot operation Gear ratio: 1st: 43/17 (2.529) 2nd: 31/19 (1.632) 3rd: 30/25 (1.200) 4th: 24/25 (0.960) 5th: 22/28 (0.786) Chassis: Frame type: Double cradle Caster angle: 29.1 ° Trail: 152.0 mm (5.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM SPECIFICATIONS Charging system: A.C. magneto Battery: Model: YTX20L-BS Voltage, capacity: 12 V, 18.0 Ah Headlight: Bulb type: Halogen bulb Bulb voltage, wattage x quantity: Headlight: 12 V, 60 W/55.0 W × 1 Tail/brake light: 12 V, 8 W/27.0 W × 1 Front turn signal/position light: 12 V, 27 W/8.0 W × 2 Rear turn signal light: 12 V, 27.0 W × 2 Neutral indicator light: 12 V, 1.7 W × 1 High beam indicator light: 12 V, 1.7 W × 1 Oil level warning light: 12 V, 1.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM CONSUMER INFORMATION EAU26351 Identification numbers EAU26380 EAU26400 Key identification number Vehicle identification number 1. Key identification number 1. Vehicle identification number The key identification number is stamped into the key tag. Record this number in the space provided and use it for reference when ordering a new key. The vehicle identification number is stamped into the steering head pipe. Record this number in the space provided.
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM CONSUMER INFORMATION EAU26470 Model label 1. Model label The model label is affixed to the frame under the rider seat. (See page 3-13.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer.
4XY15.book Page 3 Monday, May 19, 2003 5:24 PM CONSUMER INFORMATION EAU26550 Reporting safety defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A.
4XY15.
4XY15.book Page 5 Monday, May 19, 2003 5:24 PM CONSUMER INFORMATION EAU26631 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your motorcycle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required. It is not acceptable proof of maintenance work.
4XY15.
4XY15.book Page 7 Monday, May 19, 2003 5:24 PM CONSUMER INFORMATION EAU26701 YAMAHA MOTOR CORPORARION, U.S.A.
4XY15.
4XY15.
4XY15.book Page 1 Monday, May 19, 2003 5:24 PM INDEX A Accessories and replacement parts ..... 7-21 Air filter elements, cleaning .................. 7-16 Audio settings (basic) ............................. 4-4 Audio settings (modes)........................... 4-6 Audio system .......................................... 4-1 Auxiliary audio source .......................... 4-20 Auxiliary DC jack and terminals ............ 3-21 Cowlings and panels, removing and installing .........................
4XY15.book Page 2 Monday, May 19, 2003 5:24 PM INDEX Shift pedal ............................................... 3-9 Shock absorber assembly, adjusting .... 3-17 Side cases and travel trunk................... 3-14 Sidestand .............................................. 3-18 Sidestand, checking and lubricating ..... 7-28 Sound control unit ................................... 4-3 Spark plugs, checking........................... 7-11 Specifications..........................................
OWNER’S MANUAL XVZ13TFS(C) XVZ13TFMS(C) YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2003.05-0.
