Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
EAU03194
Adjusting the shock absorber
assembly
The shock absorber assembly is locat-
ed under the rider seat and is equipped
with a spring preload adjusting ring.
EC000015
CAUTION:
_
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
_
Adjust the spring preload as follows.
1. Remove the rider seat. (See
page 3-10 for rider seat removal
and installation procedures.)
2. Remove each quick fastener from
the ignitor unit panel by pushing
the center in with a screwdriver,
then pulling the fastener out.
3. Pull the ignitor unit panel out to the
right.
1. Quick fastener (× 3) 1. Ignitor unit panel
U5KS10.book Page 13 Tuesday, November 5, 2002 11:05 AM