Owner's Manual

STAGEPAS 600i, STAGEPAS 400i
GENERAL SPECIFICATIONS
STAGEPAS 600i STAGEPAS 400i
System
System Type
Powered mixer with 2 passive speakers
Maximum SPL Measured peak IEC noise @ 1m 129dB SPL / speaker 125dB SPL / speaker
Frequency Range (-10 dB) 55Hz - 20kHz 55Hz - 20kHz
Power consumption 35W (Idle), 100W (1/8 Power) 30W (Idle), 70W (1/8 Power)
Power requirements
100V - 240V 50Hz/60Hz
Dimensions (W x H x D)
Speaker 335 x 545 x 319mm (13.2" x 21.5" x 12.6"),
Mixer 348 x 197 x 135mm (13.7" x 7.8" x 5.3")
Speaker 289 x 472 x 275mm (11.4" x 18.6" x 10.8"),
Mixer 308 x 180 x 116mm (12.1" x 7.1" x 4.6")
Weight
25.4kg / 56lbs (2 x Speaker 10.8kg + Mixer 3.8kg) 17.8kg / 39.2lbs (2 x Speaker 7.5kg + Mixer 2.8kg)
Powered Mixer
Mixer Mixing channels 10 8
Analog inputs 4 mono mic/line + 6 mono / 3 stereo line 4 mono mic/line + 4 mono / 2 stereo line
Digital inputs USB Audio IN: iPod/iPhone exclusive
Channel EQ 3-band (HIGH Shelving: 8kHz, MID peaking: 2.5kHz, LOW Shelving: 100Hz) 2-band (HIGH Shelving: 8kHz, LOW Shelving: 100Hz)
Channel functions Hi-Z switch: CH4, ST/MONO switch: CH5/6-9/10 Hi-Z switch: CH4, ST/MONO switch: CH5/6-7/8
Digital effects SPX digital reverb (4 program, parameter control)
Output processing Feedback suppressor, 1-Knob Master EQ™
Phantom power +30V (CH1, 2)
Outputs SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
Control and others Reverb foot switch
Built-in Amplifiers Power Rating (Dynamic) 680W (340W + 340W) 400W (200W + 200W)
Power Rating (Continuous) 560W (280W + 280W) 360W (180W + 180W)
Speaker
Type
Two-way bass-relfex speakers
Transducers LF: 10” (25cm) cone, HF: 1.4” (3.56cm) voice coil compression driver LF: 8” (20cm) cone, HF: 1” (2.54cm) voice coil compression driver
Coverage Angle (Horizontal x Vertical) 90° x 60°
Floor Monitor Angle 50°
Handle 1 x Top
Pole socket
34.8-35.2mm pole socket with StageLok™
Accessories
Included Accessories
Cover panel, Power cord (2m), 2xSpeaker cables (6m), 12xNon-skid pads
Optional Accessories
Yamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF
DIMENSIONS
unit : mm
STAGEPAS 600i STAGEPAS 400i
MIXER MIXERSPEAKER SPEAKER
ANALOG INPUT SPECIFICATIONS
Input
terminals
MIC/LINE
Input
Impedance
Source
Impedance
Input level
Connector
Sensitivity Nominal
Max.
before clip
CH IN 1-2
MIC
3k1 150 1 Mics
-56 dBu -35 dBu -10 dBu
XLR-3-31
LINE -30 dBu -9 dBu +16 dBu
CH IN 3-4
MIC
3k1 150 1 Mics
-56 dBu -35 dBu -10 dBu
XLR
XLR Combo
LINE -30 dBu -9 dBu +16 dBu
MIC
10 k1
(Hi-Z 1 M1)
150 1 Lines
(Hi-Z 10 k1)
-50 dBu -29 dBu -4 dBu
Phone
LINE -24 dBu -3 dBu +22 dBu
CH IN 5/6 LINE 10 k1 150 1 Lines -24 dBu -3 dBu +22 dBu Phone**
CH IN 7/8 LINE 10 k1 150 1 Lines -24 dBu -3 dBu +22 dBu Phone**, RCA Pin
CH IN 9/10 LINE 10 k1 150 1 Lines -24 dBu -3 dBu +22 dBu Phone**, Stereo Mini
Input
terminals
MIC/LINE
Input
Impedance
Source
Impedance
Input level
Connector
Sensitivity Nominal
Max.
before clip
CH IN 1-2
MIC
3k1 150 1 Mics
-56 dBu -35 dBu -10 dBu
XLR-3-31
LINE -30 dBu -9 dBu +16 dBu
CH IN 3-4
MIC
3k1 150 1 Mics
-56 dBu -35 dBu -10 dBu
XLR
XLR Combo
LINE -30 dBu -9 dBu +16 dBu
MIC
10 k1
(Hi-Z 1 M1)
150 1 Lines
(Hi-Z 10 k1)
-50 dBu -29 dBu -4 dBu
Phone
LINE -24 dBu -3 dBu +22 dBu
CH IN 5/6 LINE 10 k1 150 1 Lines -24 dBu -3 dBu +22 dBu Phone**, RCA Pin
CH IN 7/8 LINE 10 k1 150 1 Lines -24 dBu -3 dBu +22 dBu Phone**, Stereo Mini
OUTPUT SPECIFICATIONS
Output terminals
Output
Impedance
Load
Impedance
Output Level
Connector
Nominal
Max.
before clip
Typ at
THD+N 10%
Dynamic
SPEAKERS OUT [L,R] <0.1 1 41 Speakers - - 180 W 200 W Phone**
MONITOR OUT [L,R] 600 1
10 k1 Lines +4 dBu +20 dBu - - Phone**
SUBWOOFER OUT 150 1
10 k1 Lines -3 dBu +17 dBu --Phone**
Output terminals
Output
Impedance
Load
Impedance
Output Level
Connector
Nominal
Max.
before clip
Typ at
THD+N 10%
Dynamic
SPEAKERS OUT [L,R] <0.1 1 41 Speakers - - 280 W 340 W Phone**
MONITOR OUT [L,R] 600 1
10 k1 Lines +4 dBu +20 dBu - - Phone**
SUBWOOFER OUT 150 1
10 k1 Lines -3 dBu +17 dBu --Phone**
STAGEPAS 400i
STAGEPAS 400i
STAGEPAS 600iSTAGEPAS 600i
DIGITAL INPUT SPECIFICATIONS
Terminal Format Connector
USB IN iPod, iPhone exclusive USB A type