Owner's Manual

Panel Operation — TUNING screen
28
PX10/PX8/PX5/PX3 Reference Manual
 POLARITY (speaker polarity)
Sets the polarity in order to avoid volume problems due to phase interference between the
speakers.
q POLARITY
When “NORMAL” is selected, the polarity is normal; when “INVERTED” is selected,
the polarity is inverted.
 LEVEL (output level)
(Advanced mode only)
Sets the output level to balance the output levels of channels.
q LEVEL
Sets the output levels in 0.1 dB increments.
 LIMITER
(Advanced mode only)
For changing the settings of the limiter depending on the speaker specifications, in order to
protect the speaker.
q ON/OFF
Turns the limiter on/off.
w THRESHOLD
Sets the threshold beyond which the limiter is activated according to output power
(Watt).
D-Contour HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
Input processor Speaker processor
Channel
D-Contour HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
Channel
Input processor Speaker processor
NOTE
When a speaker is selected with Configuration Wizard, “THRESHOLD” is automatically set.
D-Contour
Delay
HPF LPF Polarity
Speaker
Delay
Level Limiter
6 Band
PEQ
q
w
Channel
Input processor Speaker processor