User Manual

Play the Pads/Pedals

3 Select a Voice Number

You can select the voice by repeatedly striking the pad, repeatedly

pressing the pedal (while listening to the voice) or by turning the DIAL.

●

Striking the pad or pressing the pedal to select a voice.

First, select a pad or pedal by striking or pressing it once. After the

pad/pedal has been selected, every time the pad is struck or a pedal

is pressed, voice numbers will increase by a value of one (1).

● Using the DIAL to select a voice.

Turn the DIAL to the right (clockwise), and voice numbers will

increase. Turn the DIAL to the left (counter-clockwise), and voice

numbers will decrease.

4 Play the Pads and Pedals

After assigning a voice to the desired pad/pedal, press the [SONG]

button. You can now play the voice you have assigned to the pad/pedal.

Repeat the previous steps for any or all of the DD-50’s pads and pedals

and try playing your own original drum kit.

PRESET TEMPO

SONG TEMPO

REVERB ON/OFF

Different depths of the DD-50’s reverb effect can be selected to add to

the DD-50’s overall sound.

To turn on the reverb effect, press the [REVERB] button. To turn off

the reverb effect, press the [REVERB] button again.

● Select the REVERB Depth

When the reverb has been turned on, press and hold the [REVERB]

button, turn the DIAL to select one of the three reverb depths that

appear in the display. [r1], [r2], [r3].

Selecting [r3] adds the most reverb depth to the effect.

REVERB

BEAT

0 1 ........... ........... ...........73 74

CLICK ON/OFF

The DD-50’s CLICK feature produces a metronome click to make the

tempo easier to follow and improve your timing while playing the pads.

To hear the metronome click, press the [CLICK] button. To turn the

click off, press the button once again.

CLICK

• REVERB Depth data is not transmitted or received via MIDI.