Operation Manual

VX-8R OPERATING MANUAL 87
TRANSMIT AN APRS BEACON
APRS
®
OPERATION
7. Rotate the DIAL knob (or press the keyboard) to select the
first character of the callsign (with SSID) of the digipeater.
8. Press the key to move to the next character.
9. Repeats steps 7 and 8 to program the remainder of the
callsign.
10. If you make a mistake, press the key to backspace the cursor, then re-enter the
correct character.
11. When you have completed your entry, press the PTT switch to save the new setting
and exit to the STATION LIST screen.