Operation Manual

ManualsBrandsYaesu ManualsAmateur RadioVX-8R

VX-8R OPERATING MANUAL 27

ADJUSTING THE KEYPAD BEEPER VOLUME LEVEL

A keypad beeper provides useful audible feed back whenever a key button is pressed. The

keypad beeper level changes according to the receiver audio volume level setting. How-

ever, you may adjust the volume balance between the receiving audio and keypad beeper

using Set Mode Item

11: BEEP LEVEL11: BEEP LEVEL

11: BEEP LEVEL.

1. Press and hold the key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item

11: BEEP11: BEEP

11: BEEP

LEVELLEVEL

LEVEL.

3. Press the key briefly to enable selection of this Set Mode

Item.

4. Rotate the DIAL knob to select the desired level.

5. When you have made your choice, press the PTT switch to

save the new setting and return to normal operation.

Additionally, if you want to turn the beep off:

1. Press and hold the key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item

13: BEEP13: BEEP

13: BEEP

SELECTSELECT

SELECT.

3. Press the key briefly to enable selection of this Set Mode

Item.

4. Rotate the DIAL knob to change the setting to “

OFFOFF

OFF”.

5. When you have made your choice, press the PTT switch to

save the new setting and return to normal operation.

6. If you wish to re-enable the Beeper, just repeat the above

procedure, rotating the DIAL knob to select “

KEYKEY

KEY” or “

KEY & SCANKEY & SCAN

KEY & SCAN” in step “4”

above.

KEYKEY

KEY: The beeper sounds when you press any key.

KEY & SCANKEY & SCAN

KEY & SCAN: The beeper sounds when you press a key or when the scanner stops.

SETTING THE FREQUENCY DISPLAY IMAGE SIZE

When operating in “Mono” band, pressing the or key, causes the LCD to “toggle”

between display of double-size characters and large characters. However, this feature

does not work during Dual Receive operation, as two frequencies are displayed in that

instance.

ADVANCED OPERATION

LARGE CHARACTERS

DOUBLE-SIZE CHARACTERS