Operation Manual

VX-8R OPERATING MANUAL 133
CHANGING THE STATUS OF THE KEY
By factory default, the key keeps the status while pressing and holding the key
down. You may change the status of the key to keep the status for approximately
three seconds after pressing the key, after which time it reverts back to its previous
status.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
107: VOL-107: VOL-
107: VOL-107: VOL-
107: VOL-
UME MODEUME MODE
UME MODEUME MODE
UME MODE.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired mode.
NORMALNORMAL
NORMALNORMAL
NORMAL: The key keeps the status while pressing
and holding the key down.
AUTO BACKAUTO BACK
AUTO BACKAUTO BACK
AUTO BACK: The key keeps its status for approxi-
mately three seconds after pressing the key.
5. When you have completed your selection, press the PTT switch to save the new
setting and exit to normal operation.
MISCELLANEOUS SETTING