Operation Manual

VX-170 OPERATING MANUAL 77
Function: Selects the function of the
[
REV
(
HOME
)]
key.
Available Values:
<
REV
>
/
<
HOME
>
Default: <REV>
<
REV
>
: Pressing the
[
REV
(
HOME
)]
key reverses the transmit and receive frequencies
during repeater operation.
<
HOME
>
: Pressing the
[
REV
(
HOME
)]
key instantly recalls a favorite “Home” channel.
Set Mode Item 34
[
RF SQL
]
Function: Adjusts the RF Squelch threshold level.
Available Values: S-1/S-2/S-3/S-4/S-5/S-6/S-8/S-FULL/OFF
Default: OFF
Set Mode Item 35
[
RPT.MOD
]
Function: Sets the Repeater Shift Direction.
Available Values: RPT.OFF/RPT. –/RPT. +
Default: Depends on the transceiver version, as well as the setting of Set Mode Item 4:
ARSARS
ARSARS
ARS.
Set Mode Item 36
[
PRI.RVT
]
Function: Enables/disables the Priority Revert feature.
Available Values: RVT.OFF/RVT. ON
Default: RVT.OFF
See page 43 for details.
Set Mode Item 37
[
RXSAVE
]
Function: Selects the Receive-mode Battery Saver interval (“sleep” ratio)
Available Values: 200 MS(1:1)/300 MS(1:1.5)/500 MS(1:2.5)/1 S(1:5)/2 S(1:10)/OFF
Default: 200 MS
Set Mode Item 38
[
S SRCH
]
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE/CONT
Default: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction, starting on the
current frequency. All channels where activity is present (up to 15 in each di-
rection) are loaded into the Smart Search memories. Whether or not all 31
memories are filled, the search stops after one sweep in each direction.
CONT: The transceiver makes a sweep in each direction as with the “SINGLE” mode,
but if all 31 channels are not filled after the first sweep, the radio continues
sweeping until they are all filled.
Set Mode Item 39
[
SCN MD
]
SET
(
MENU
)
M
ODE