Operation Manual

VX-127 OPERATING MANUAL 51
INTERNET CONNECTION FEATURE
You may access other Internet Link Systems (including WIRES™ in the “FRG” mode) that
use a DTMF string for access.
1. Load the DTMF tones which you wish to use for Internet-link access into a DTMF
Autodial memory register. For purposes of this example, we will use “#123” as the access
code.
A. Press the
[
SET
( )
EMG
]
key momentarily to enter the Set
mode.
B. Rotate the DIAL knob to select Set Mode Item 17: DT WRT.
C. Press the
[
F
]
key to enable adjustment of this Set Mode Item.
D. Rotate the DIAL knob to select the DTMF Memory register
(“d1” ~ “d9”) into which you wish to store the access code.
E. Press the
[
F
]
key momentarily. The first digit will blink.
F. Rotate the DIAL knob to select “F” (representing DTMF
“#”: the first digit of the DTMF string).
G. Press the
[
F
]
key momentarily to accept the first digit and
move to the second digit of the DTMF string.
H. Repeat the previous steps until you have completed the ac-
cess code (“#(F)123”).
I. Press and hold in the
[
F
]
key for one second to save the setting.
2. Press the PTT switch to exit to normal operation.
3. Press the
[
SET
( )
EMG
]
key momentarily to enter the Set mode
again.
4. Rotate the DIAL knob to select Set Mode Item 24: INT MR.
5. Press the
[
F
]
key to enable adjustment of this Set Mode Item.
6. Rotate the DIAL knob to select the DTMF access number (“d
1
” ~ “d 9”) corresponding to the Internet link repeater to which
you wish to establish an Internet link, then press the
[
F
]
key
momentarily to lock in the selected access number.
7. Rotate the DIAL knob to select Set Mode Item 22: I NET.
8. Press the
[
F
]
key to enable adjustment of this Set Mode Item.
9. Rotate the DIAL knob to set this Set Mode Item to “INT.MEM”
(thus activating the “Other Internet Link System” mode).
10. Press the PTT switch momentarily to save the new settings and
exit to normal operation.
11. The “ ” icon will appear in the upper right corner of the dis-
play (thus activate the Internet Connection feature).
12. Once the Internet Connection feature is activated per step 9 above,
you may now press the
[
SET
( )
EMG
]
key, while you are transmitting, to send out the
selected DTMF string (to establish the link to the desired Internet-link mode).
13. To disable the Internet Connection feature, press the
[
F
]
key, then press the
[
SET
( )
EMG
]
key (the “ ” icon will disappear from the display).