Operation Manual

VX-110 OPERATING MANUAL36
Set Mode
Set Item 31
[
NAR/WID
]
Function: Select the Operating band width.
Available Values: NARROW/WIDE
Default: WIDE
Set Item 32
[
DTMF SP
]
Function: Select the DTMF Autodialer sending speed.
Available Values: 50 ms/100 ms
Default: 50 ms (High speed)
Set Item 33
[
DT DLY
]
Function: Select the DTMF Autodialer delay time.
Available Values: 450 ms/750 ms
Default: 450 ms
Set Item 34
[
ANI
]
Function: Program and activate the ANI Identifier
See page 13 for details.
Set Item 35
[
BATT
]
Function: Indication of the Supply Voltage.
In this mode, press the
[
F
]
key, then press the PTT key, to exit to normal operation.
Set Item 36
[
SKIP
]
Function: Enable/disable skipping of a memory during scanning.
Available Values: ON/OFF
Default: OFF (Scanner stops when the channel is busy)