Operation Manual

Page 120 FT
DX
3000 OperaTing Manual
088 TONE FREQ
Function: Select the desired CTCSS Tone. A total of 50
standard CTCSS tones are provided (see the CTCSS
Tone Chart on Page 91).
Available Values: 67.0 ~ 254.1 Hz
Default Setting: 67.0 Hz
MODE-RTTY Group
089 RTTY LCUT FREQ
Function: Selects the cutoff frequency of the lower side
oftheRXaudiolterintheRTTYmode.
Available Values: OFF/100 ~ 1000 Hz (50 Hz/step)
Default Setting: 300
090 RTTY LCUT SLOPE
Function:Selectsthelterslopeofthelowersideofthe
RXaudiolterintheRTTYmode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 18dB/oct
091 RTTY HCUT FREQ
Function: Selects the cutoff frequency of the upper side
oftheRXaudiolterintheRTTYmode.
Available Values: OFF/700 ~ 4000 Hz (50 Hz/step)
Default Setting: 3000
092 RTTY HCUT SLOPE
Function:Selectsthelterslopeoftheuppersideofthe
RXaudiolterintheRTTYmode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 18dB/oct
093 RTTY SHIFT PORT
Function: Selects the Shift Port to be used.
Available Values: REAR / USB
Default Setting: REAR
094 POLARITY-R
Function: Selects normal or reverse Mark/Space polarity
for RTTY receive operation.
Available Values: NOR/REV
Default Setting: NOR
095 POLARITY-T
Function: Selects normal or reverse Mark/Space polarity
for RTTY transmit operation.
Available Values: NOR/REV
Default Setting: NOR
096 RTTY OUT LEVEL
Function: Sets the RTTY (AFSK) data output level at
the output port (pin 5) of the RTTY/PKT jack.
Available Values: 0 ~ 100
Default Setting: 50
097 RTTY SHIFT
Function: Selects the frequency shift for RTTY (AFSK)
operation.
Available Values:170/200/425/850 Hz
Default Setting: 170 Hz
098 RTTY MARK FREQ
Function: Selects the Mark tone for RTTY operation.
Available Values: 1275/2125 Hz
Default Setting: 2125 Hz
MODE-SSB Group
099 SSB LCUT FREQ
Function: Selects the cutoff frequency of the lower side
oftheRXaudiolterintheSSBmode.
Available Values: OFF/100 ~ 1000 Hz (50 Hz/step)
Default Setting: 200
100 SSB LCUT SLOPE
Function:Selectsthelterslopeofthelowersideofthe
RXaudiolterintheSSBmode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
101 SSB HCUT FREQ
Function: Selects the cutoff frequency of the upper side
oftheRXaudiolterintheSSBmode.
Available Values: OFF/700 ~ 4000 Hz (50 Hz/step)
Default Setting: 2800
102 SSB HCUT SLOPE
Function:Selectsthelterslopeoftheuppersideofthe
RXaudiolterintheRTTYmode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
103 SSB MIC SEL
Function: Selects the microphone to be used on the SSB
mode.
Available Values: FRONT / DATA / USB
Default Setting: FRONT
FRONT: Selects the microphone connected to the front
panel MIC jack while using the SSB mode.
DATA: Selects the microphone connected to pin 1 of
the PACKET Jack while using the SSB mode.
USB: Selects the microphone connected to the USB
Jack while using the SSB mode.
104 SSB TX BPF
Function: Selects the audio passband of the DSP
modulator on the SSB mode.
Available Values: 100-3000/100-2900/200-2800/300-
2700/400-2600/3000WB
Default Setting: 300 ~ 2700 (Hz)
Menu Mode