Operation Manual

Page 57FTDX9000MP OPERATION MANUAL
DIAL SWAP CONFIGURATION
(
AF/RF GAIN CONTROLS
)
Using the Menu, it is possible to change the RF GAIN control (for the Main (VFO-A) band) to serve as the Sub (VFO-
B) AF GAIN control. In this case, the Menu Item [GENERAL 038 AF/RF DIAL SWAP] will move the Main (VFO-
A) RF GAIN control function to the knob normally utilized for the Sub (VFO-B) receiver’s AF GAIN control. In this
way, both the Main and Sub receiver AF GAIN controls will be on the same shaft, as will the two receivers’ RF GAIN
controls, and this may be particularly useful during Dual Receive operation.
Dial Swap Setup
1. Press the MNU key (# ) to engage the Menu
mode; the Menu list will appear on the LCD display.
2. Rotate the MAIN Tuning Dial knob (# ) to select
Menu item [GENERAL 038 AF/RF DIAL SWAP].
3. Rotate the CLAR/VFO-B knob (# ) so as to se-
lect “SWAP” instead of the factory-default “NOR-
MAL” selection.
4. Press and hold in the MNU key for two seconds to
save the new configuration and exit to normal opera-
tion.
Quick Point
If the Dial Swap function has been engaged, the Main
(VFO-A) AF GAIN RF GAIN control (# ) will be
reconfigured so that it now operates as AF GAIN (MAIN)
AF GAIN (SUB); the Sub (VFO-B) band’s AF GAIN
RF GAIN control (# ) will now be configured as
RF GAIN (MAIN) RF GAIN (SUB).
CONVENIENT FEATURES
MAIN(VFO-A)
AF GAIN Knob
SUB(VFO-B)
AF GAIN Knob
MAIN(VFO-A)
RF GAIN Knob
SUB(VFO-B)
RF GAIN Knob
MAIN Tuning Dial Knob
MNU Key
CLAR/VFO-B Knob