Operation Manual

Page 115FT DX 9000MP OPERATION MANUAL
The Quick Memory Bank is comprised of five memories (labeled “C1” ~ “C5”) independent from the regular and PMS
memories. These can quickly store operating parameters for later recall.
QMB CHANNEL STORAGE
1. Tune to the desired frequency on the Main (VFO-A)
band.
2. Press the blue (QMB) STO key (# ). The “beep”
will confirm that the contents of the Main (VFO-A)
band have been written to the currently-available QMB
memory.
If you repeatedly press the (QMB) STO key, the QMB
memories will be written in the following order:
C-2  C-3  C-4  C-5  C-1
Once all five QMB memories have data on them, previous
data (starting with channel C1) will be over-written on a
first-in, first-out basis.
QMB CHANNEL RECALL
1. Press the (QMB) RCL key (# ). The display will
indicate “QMB” and the current QMB channel’s data
will be shown on the main frequency display field.
2. Repeatedly pressing the (QMB) RCL key will toggle
you through the QMB channels:
C-2  C-3  C-4  C-5  C-1
Press the V/M key (# ) to return to the VFO or
Memory mode.
Advice
Rotating the MAIN Tuning Dial knob (# ), or chang-
ing the operating mode, will place the transceiver in the
“Memory Tune” mode, which is a temporary “pseudo-
VFO” method of tuning off of a stored memory channel.
If you do not over-write the contents of the current memory
channel, the original contents will not be disturbed by the
initiation of Memory Tune operation.
QMB
(
Q
UICK MEMORY BANK
)
QMB STO key
QMB RCL key V/M key