User's Manual

54 FT-8800R Operating Manual
FM BANDWIDTH & MIC GAIN CONTROL
You can reduce the microphone input level and receiver bandwidth when operating on tightly-
clustered frequencies (channel spacing of 12.5 or 15 kHz). This will reduce the transmitter
and receiver deviation, thus minimizing interference to other users (and improving recep-
tion, as well).
To configure for the narrower bandwidth, use the following procedure:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #44 (WID.NAR).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL knob
to change the display to “NARROW.”
4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new setting and
to normal operation.
To restore the normal (higher) microphone input level and normal (15 kHz) receiver band-
width, select “WIDE” in step 3 above.
MISCELLANEOUS SETTINGS
FCC ID: K66FT-8800R
Vertex Standard Co., Ltd.