User's Manual

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
The optional MLS-200-M10 High-Power External Speaker includes its own swivel-type
mounting bracket, and is available from your Yaesu dealer.
Other external speakers may be used with the FTM-10R, if they present the specified
8-Ohm impedance and are capable of handling the 8 Watts of audio output supplied by
the FTM-10R.
Base Station Installation
The FTM-10R is ideal for base station use as well as in mobile installations. The
FTM-10R is specifically designed to integrate into your station easily, using the
information to follow as a reference.
AC Power Supplies
Operation of the FTM-10R from an AC line requires a power source capable of providing
at least 9 Amps continuously at 13.8 Volts DC. The FP-1025A and FP-1030A AC Power
Supplies are available from your Yaesu dealer to satisfy these requirements. Other
well-regulated power supplies may be used, as well, if they meet the above voltage and
current specifications.
Use the DC power cable supplied with your transceiver for making power connections to
the power supply. Connect the RED power cable lead to the POSITIVE (+) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE (–) power supply
terminal.
Front Panel Controls & Switches
1. MIC
The internal microphone is located here.
The internal microphone is only activated when the top panel’s [PTT] key is pressed.
2. SELECT Key
Press this key momentarily to select the functions of the front panel’s [X] key and DIAL
knob.
The available selections are:
Transceiver/Frequency mode  Transceiver/Volume mode  Clock/Timer mode* 
Transceiver/Frequency mode …
*: The Clock/Timer mode is disabled at the factory default. To enable this mode, see
page ??.
Vertex Standard Co., Ltd.
6