User's Manual

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
Set Mode Item [F13 DC VOLT]
Function: Indicates the DC Supply Voltage.
Set Mode Item [F14 DIMMER]
Function: Setting of the display’s illumination level.
Available Values: MIN/LOW/NOR/HIGH/MAX
Default: MAX
Set Mode Item [F15 DTMF]
Function: Programming of the DTMF Autodialer. See page ?? for details.
Set Mode Item [F16 DUAL MIX]
Function: Select the Priority Channel Scanning (Dual Watch) Resume mode.
Available Values: OFF/AUTO/MANUAL/BAND MIX
Default: OFF
OFF: Disable the Priority Channel Scanning (Dual Watch).
AUTO: The Priority Channel Scanner will hold for five seconds, then will resume when
the carrier drops at the CLUB channel.
MANUAL: The Priority Channel Scanner will stop when a signal is received at the
CLUB channel, and will not restart.
BAND MIX: The Priority Channel Scanner will stop when a signal is received at the
CLUB channel, and will not restart. The audio signals from both the current frequency
and the Priority Channel output from the speaker with mixed. This selection is very
useful
Set Mode Item [F17 FNC KEY]
Function: .
Set Mode Item [F18 MIC GAIN]
Function: Adjust the microphone gain level.
Available Values: MIN/LOW/NORMAL/HIGH/MAX
Default: NORMAL
Set Mode Item [F19 MY ID]
Function: Sets your Personal ID for the Message feature. See page ?? for details.
Vertex Standard Co., Ltd.
48