User's Manual

Chapter 8. Updating terminal firmware
YSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE 611
Performing an Emergency terminal firmware update
NOTE:
Emergency updates are always full updates – not differential updates.
1 Download the new firmware files from the Y Soft Partners‘ Portal
(http://partners.ysoft.com) to the SafeQ server.
2 Copy the new firmware files into the "update" folder
(typically: c:\SafeQ\server\update\).
3 Edit the configuration file (safeQ.fwupdate.conf or fwupdate.conf), which is located
in the SafeQ home directory in the folder conf\modules (or conf\), as described in
the following example. (The configuration file includes parameters for different
versions of terminals and for the recharging station.)
In the Terminal v3 firmware area, look at the line that includes “emergency”. On the left
side of the equal sign ( = ) is the version of the terminal and on the right is the new
firmware. In the example shown here, the last time an emergency update was performed,
Terminal Professional version 3 was updated with firmware version 3.1.0.