Operation Manual

English

VGA

You can use the TV set as a PC monitor by using the VGA interface. Please

connect a VGA cable with the VGA input of the TV set and with the PC. With

this kind of connection only video signals are transmitted. For listening sound

on the TV you should establish also a sound connection. Please connect the

white and red wire of the 2-pin component cable with the AUDIO OUT

(source) and the stereo jack with the “PC IN” plug of the TV set.

Notes:

 Before you connect the HTC TV set with the PC, please change the graphic resolution of the

PC.

 For displaying the best results, please uses the native resolution of the TV LCD



Digital Coaxial Sound output

The specifications of DVB broadcast allows to transmit Stereo and/or Dolby Digital sound.

To output the Dolby Digital sound you can connect the TV set with a digital amplifier via

COAXIAL OUT and listen the sound by a connected speaker set.

Earphone

You can connect the a headphone on the TV set. Please insert the 3.5 phone jack into the

headphone connector.

USB / MEDIA

Opens the built-in USB Multimedia Player (page 20).

DVD (HTC Models)

Opens the built-in DVD Player (page 21)

Signal sources

Nr. Modus Auflösung Frequenz (V)

VGA

720 X 400 70 Hz

2 640 X480 60 Hz

3 SVGA 800X600 60 Hz

XGA

1024X768 60 Hz

5 1280X720 60 Hz

WXGA

1360X768 60 Hz