XOV30S XOV36S XOV42S NEED HELP? Call our ventilation experts toll free al 800-966-8300 AVEZ-VOUS BESOIN D’AIDE ? Contactez nos experts au numéro gratuit 800-966-8300 ¿NECESITA AYUDA? Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300 USA RANGE HOOD - User instructions F HOTTE DE CUISINE - Notice d’utilisation E CAMPANA EXTRACTORA - Manual de utilización
XO Hood Warranty Proof of original purchase date and invoice is needed to obtain service under warranty. What is covered Limited 2 Year Warranty. For 2 years from the original date of purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood that fails because of a manufacturing defect. The warranty is extended to the original purchaser for products purchased for ordinary home use in North America.
ENGLISH USA IMPORTANT SAFETY INSTRUCTIONS FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. IMPORTANT: Save these Instructions for the Local Electrical Inspectors use. INSTALLER: Please leave these Instructions with this unit for the owner. OWNER: Please retain these instructions for future reference. Take care when using cleaning agents or detergents. Suitable for use in household cooking area.
Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambè). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. Keep fan, filters and grease laden surface clean. F. Use high range setting on range only when necessary.Heat oil slowly on low to medium setting. G. Don’ t leave range unattended when cooking. H.
D. Ducted fans must always be vented to the outdoors. E. This unit must be grounded. WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. A. B. C. D. E. F. WARNING - UNDER CERTAIN CIRCUMSTANCES DOMESTIC APPLIANCES MAY BE DANGEROUS. Do not check filters with hood working. Do not touch the lamps after a prolonged use of the appliance. No food must be cooked flambè underneath the hood. The use of an unprotected flame is dangerous for the filters and could cause fires.
Installation Preparation DUCT FITTINGS: This Hood Must Use an 6" Round Duct. It Can Transition to 3-1/4" x 10" or 3-1/4" x 12" Duct. Use this chart to compute maximum permissible lengths for duct runs to outdoors. NOTE: Do not exceed maximum permissible equivalent lengths! Maximum duct length: 100 feet for range hoods. Flexible ducting: If flexible metal ducting is used, all the equivalent feet values in the table should be doubled.
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. INSTALL THE DUCTWORK: NOTE: To reduce the risk of fire, use only metal ductwork. 1. Decide where the ductwork will run between the hood and the outside. 2.
› Front of hood › Side of hood �������� › Top of hood ��� ������� ������� ��������������������������������������� �������� › Mounting height and clearance: ��� ������ Hood Specifications Product dimensions and clearance XOV30S - XOV36S - XOV42S: ����������������� ��������������� ��� -8-
Installation Instructions Installation - Vented to the outside �� 1. MOUNT TO THE WALL: Drill the holes A respecting the distances indicated (Fig.1). Fix the appliance to the wall and align it in horizontal position to the wall units. When the appliance has been adjusted, definitely fix the hood using the screws A (Fig.2). For the various installations use screws and screw anchors suited to the type of wall (e.g. reinforced concrete, plasterboard, etc.).
POWER SUPPLY: IMPORTANT – (Please read carefully) WARNING: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances.
2. Connect Electrical: WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before making electrical connections to power supply, the electrical box must be secured in place as indicated in Fig.3. Before installing the appliance fix the electrical box as indicated in Fig.3. Fig.3A: Lift the electrical plant box. Fig.3B: Remove the 3 fixed screws. Fig.
• Power Supply Connection: For connection to the power supply refer to the following Fig.4-5: 1. Remove the power supply cover by undoing the (2) screws Fig.4-5A. 2. Break through the hole on the box cover. 3. Secure the power supply conduit to the cover. 4. Connect the wires of the hood to those of the power supply as described. Fig.4-5B: BLACK = L line WHITE = N neutral GREEN/YELLOW = G ground - A double-pole switch properly rated must be installed to provide the range hood power supply disconnection.
- Carry out the power supplly connection in accordance with the national electric code, ANSI/NFPA 70-1999. 5. Insert the wires into the box, then close the box cover, securing it using the screws that were previously removed. The appliance must be installed at a minimum height of 27" from an electric cooker stove, or 30" from gas or combined cooker stoves. If a connection ductwork composed of two parts is used, the upper part must be placed outside the lower part.
�� 4. INSTALL THE DUCT COVER: Arrange the electrical power supply within the dimensions of the decorative flue. If your appliance is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening. Adjust the width of the support bracket of the upper flue (Fig.8). Then fix it to the ceiling using the screws A (Fig.8) in such a way that it is in line with your hood and respecting the distance from the ceiling indicated in Fig.7.
Ductless Recirculating Option: ��� � � � � ��� Carbon filter kit XORFK02 (30"): We have an air diverter A, 10 screws B, 2 rectangular filters C and the bracket D. ��� ��� � � � � ��� ��� Carbon filter kit XORFK03 (36" - 42"): We have an air diverter A, 12 screws B, 4 rectangular filters C and the bracket D.
� � � � ��� ��� ��� ��� ��� ���� ��� ��� ��� Fig.1: Remove the 2 screws E and have the top flue F go into the bottom flue G. Remove the two flues F/G and place them on a flat surface. � ������� �� ����� � Fig.2: Make a mark on the wall and then drill a hole 1/4" inches away from the middle of the bracket. Insert the expansion plug. � � � � � � ��� ��� ��� Fig.3: Put together the two parts of the air deviator as shown in picture no 3.1.
6" Round Flexible Metal Duct Pipe Not Included ��� ��� ��� ��� ��� ��� Fig.5: Fasten the air diverter permanently to the wall with a screw (the hole previously drilled in Fig.2). � Fig.6: Once the air diverter has been inserted into the bracket and fastened to the wall connect the flexible (6" Round Flexible Metal Duct Pipe Not Included) pipe to the diverter, use duct tape to seal. � � � � � ��� ��� ��� ��� ��� ��� Fig.
��� � � � � � � � � Fig.9: Take the bracket D and fasten it to the hood using the 10 screws B (provided). Take the 2 rectangular filters C and apply them onto the bracket D as shown in the figure. ��� ��� � � � � � � � � Fig.10: Take the bracket D and fasten it to the hood using the 12 screws B (provided). Take the 4 rectangular filters C and apply them onto the bracket D as shown in the figure.
� � ��� ��� ��� Fig.11: Put the aluminum panels back in place (Fig.8).
MAINTENANCE • We recommend that the cooker hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The effective performance of the cooker hood depends on constant maintenance; the anti-grease filter and the active carbon filter both require special attention.
- DO NOT allow deposit to remain for long periods of time. - DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust. - DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals with may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.
FUSE • The halogen lamps circuit is controlled by a fuse 5x20 mm, 125V 5A. In case of necessity it can be replaced only by specialized personnel. • Replacing halogen light bulbs: In order to replace the dichroic lamps, carefully remove the lamp from the lamp holder with the help of a small flat screwdriver or a similar tool. PLEASE NOTE! In doing this operation, please take care not to scratch the hood. Replace the bulbs with new ones of the same type.
XOV30S - XOV36S - XOV42S: ��� �� ��� ��� �� �� ��� �� ��� ��� ��� ��� ��� ��� - 23 -
OPTIONS AND ACCESSORIES: Model XORFK02 Ductless Recirculating Filter Kit. ��� Model XORFK03 Ductless Recirculating Filter Kit.
Model XOEDCV - Duct Cover Extension. This accessory is available for installation with ceiling heights above 9 ft to 10 ft.
INSTALLATION PREPARATION: Check installation hardware: Locate the hardware package packed with the hood and check contents. TYPE DESCRIPTION N° A 1/8" x 1/2" Screws for attaching the decorative flue to the mounting bracket.
XOV Spec Sheet Model: XOV30S - XOV36S - XOV42S Sizes: 30"- 36"- 42" Depth: 24" Features and Benefits: - Premium 700 CFM (EBM) high velocity, whisper quiet blower optimally removes Smoke, Grease and Odors. - Illuminated Touch controls with 3 level light dimmer. - Two 50 W Halogen Lights - Provide brilliant illumination over the cooking surface. - High quality Stainless Steel with incomparable handcrafted Italian finish.
