XOC24SMUA XOC30SMUA XOC36S XOC30S NEED HELP? Call our ventilation experts toll free al 800-966-8300 AVEZ-VOUS BESOIN D’AIDE ? Contactez nos experts au numéro gratuit 800-966-8300 ¿NECESITA AYUDA? Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300 USA RANGE HOOD - User instructions F HOTTE DE CUISINE - Notice d’utilisation E CAMPANA EXTRACTORA - Manual de utilización
XO Hood Warranty Proof of original purchase date and invoice is needed to obtain service under warranty. What is covered Limited 2 Year Warranty. For 2 years from the original date of purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood that fails because of a manufacturing defect. The warranty is extended to the original purchaser for products purchased for ordinary home use in North America.
ENGLISH USA IMPORTANT SAFETY INSTRUCTIONS FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. IMPORTANT: Save these Instructions for the Local Electrical Inspectors use. INSTALLER: Please leave these Instructions with this unit for the owner. OWNER: Please retain these instructions for future reference. Take care when using cleaning agents or detergents. Suitable for use in household cooking area.
Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambè ). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. Keep fan, filters and grease laden surface clean. F. Use high range setting on range only when necessary.Heat oil slowly on low to medium setting. G. Don’ t leave range unattended when cooking. H.
E. This unit must be grounded. WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. WARNING - UNDER CERTAIN CIRCUMSTANCES DOMESTIC APPLIANCES MAY BE DANGEROUS. A. Do not check filters with hood working. B. Do not touch the lamps after a prolonged use of the appliance. C. No food must be cooked flambè underneath the hood. D. The use of an unprotected flame is dangerous for the filters and could cause fires. E. Watch constantly the fried food in order to avoid the cooking oil flares up. F.
Installation Preparation DUCT FITTINGS: This Hood Must Use an 6" Round Duct. It Can Transition to 3-1/4" x 10" or 3-1/4" x 12" Duct. Use this chart to compute maximum permissible lengths for duct runs to outdoors. NOTE: Do not exceed maximum permissible equivalent lengths! Maximum duct length: 100 feet for range hoods. Flexible ducting: If flexible metal ducting is used, all the equivalent feet values in the table should be doubled.
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. INSTALL THE DUCTWORK: NOTE: To reduce the risk of fire, use only metal ductwork. 1. Decide where the ductwork will run between the hood and the outside. 2.
› Front of hood › Side of hood Hood Specifications Product dimensions and clearance XOC24SMUA - XOC30SMUA - XOC36S - XOC30S: › Top of hood › Mounting height and clearance:
Installation Instructions Installation - Vented to the outside Before proceeding with installation operations, remove the anti-grease filters (Fig.3) in order to make handling the device easier. This product can be installed in 3 different ways, depending on the model and on your requirements: 1- installation of the hood on the lower part of the wall unit. 2- installation of the hood on the lower part of the wall unit on a divider support.
1. Fixing the hood to the lower part of the wall cabinet: Follow the steps below: 1- Position template B on the wall unit, bearing in mind the measurements indicated in fig. 1-2 and the minimum distance from the hob. - Mark the references to fix brackets A to the wall unit, as indicated in figure 4. 2- Make sure the thickness of the wall unit is within the parameters indicated in figure 4 - step 2.
firmly reaches the wall unit (figure 4 - step 3.2). After any adjusting, tighten the bracket to the body (figure 4 - step 3.3). - Fasten screw D to the wall unit as indicated in figure 4 - step 4. - Once you have fastened the hood to the wall unit, adjust the spacer L, with the screws P, to make the device line up with the rear wall unit (figure 4 - step 5).
2. INSTALLATION OF THE HOOD ON THE LOWER PART OF THE WALL UNIT ON THE DIVIDING PANEL. Follow the steps below: 1 -Check the measurements indicated in fig.1-2 and the minimum distance from the hob, before installing the hood on the dividing panel. 3- Make sure the thickness of the wall unit is within the parameters indicated in figure 4 - step 2. 4- Build the hood in the wall unit and make sure the 2 side springs F are connected correctly.
- 13 -
- 14 -
3. INSTALLATION OF THE HOOD ON THE LOWER PART OF THE WALL UNIT ONLY FOR 30". This model includes side installation to the wall unit by using 2 brackets B (figure 6 besides steps 3-4, indicated in figure 4). 1- Position template B on the wall unit, bearing in mind the measurements indicated in fig. 1-2 and the minimum distance from the hob. - Mark the references to fix brackets A to the wall unit, as indicated in figure 6.
- Once you have fastened the hood to the wall unit, adjust the spacer L, with screws P, to make the device line up the rear wall unit (figure 4 - step 5). IMPORTANT - The range hood must be secured to wall studs or use drywall anchors capable of supporting 75 lbs.
POWER SUPPLY: IMPORTANT – (Please read carefully) WARNING: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances.
2. CONNECT ELECTRICAL: • Power Supply Connection: For connection to the power supply refer to the follows Fig.7: BLACK = L line WHITE = N neutral GREEN/YELLOW = G ground - A double-pole switch properly rated must be installed to provide the range hood power supply disconnection. - Connect the electrical conduit to the Field Wiring Compartment using listed conduit fittings. - Carry out the power supply connection in accordance with the national electric code, ANSI/NFPA 70-1999. 5.
Ductless Recirculating Option: Carbon filter kit XOC24SMUA - XOC30SMUA - XOC36S - XOC30S : follow the indications described in the additional sheet to install the kit.
- 20 -
- 21 -
USE • If the apparatus is equipped with the following controls luminous: A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III F = AUTOMATIC STOP TIMER - 15 minutes (*) • The appliance has the INTENSIVE speed function, press key E for two seconds and it will be activated for 10 minutes after which it will return to the previously set speed. When the function is active the LED flashes. To interrupt it before the 10 minutes have expired press key E again.
MAINTENANCE • We recommend that the cooker hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The effective performance of the cooker hood depends on constant maintenance; the anti-grease fil ter and the active carbon filter both require special attention.
- DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust. - DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals with may be harmful. Rinse with water after exposure and wipe dry with a clean cloth. Painted surfaces should be cleaned with warm water and mild detergent only.
• Replacing halogen light bulbs: To replace the dichroic lamps, rotate the lamp anticlockwise by means of a suction cup as shown in figure. Replace the bulbs with new ones of the same type.
XOC24SMUA - XOC30SMUA - XOC36S - XOC30S: - 26 -
OPTIONS AND ACCESSORIES: Model XORFRND Ductless Recirculating Filter Kit. Model XORFK12 Ductless Recirculating Filter Kit.
INSTALLATION PREPARATION: Check installation hardware: Locate the hardware package packed with the hood and check contents. TYPE DESCRIPTION N° 1/8" x 1/4" 3 3/16" x 9/16" 4 1/4" A 6/16" B Adjusting brackets Aluminum filter Supply of side fixing brackets on wall unit only for 30" 1/8" x 1/4" N°4 Side fixing brackets on wall unit no. 2.
XOC Spec Sheet Model: XOC24SMUA - XOC30SMUA - XOC36S XOC30S Sizes: 24" - 30" - 36" Depth: 11-1/16" Features and Benefits: Model: XOC24SMUA - XOC30SMUA - 395 CFM high velocity blower optimally removes Smoke, Grease and Odors. - 3 speed electronic illuminated controls. Model: XOC36S - XOC30S - 600 CFM high velocity blower optimally removes Smoke, Grease and Odors. - 3+1 speed electronic illuminated controls.