Installation Manual

EXI HALO Installation Manual Rev 2.0

EXI Wireless Systems Inc. Page 4 June, 1999
Table of Contents
1. INTRODUCTION..............................................................................................................................................5
1.1. INTENDED AUDIENCE ...................................................................................................................................5
1.2. SYSTEM OPERATION..............................................................................................................................5
2. DECISIONS TO MAKE PRIOR TO INSTALLATION.............................................................................6
2.1. SYSTEM WIRING......................................................................................................................................6
2.2. CONTROLLER CONFIGURATIONS......................................................................................................7
2.3. LOCATION FOR SRA EXCITER ANTENNAS......................................................................................7
2.4. KEYPAD OR PINPAD? ............................................................................................................................9
2.5. LOCATING THE RECEIVER ANTENNA..............................................................................................9
3. INSTALLATION PROCEDURES...............................................................................................................10
3.1. INSTALLING CONTROLLERS..............................................................................................................10
3.1.1. PREPARE CONTROLLER FOR FIELD SET UP.........................................................................10
3.1.2. TEST CONTROLLER AND SET UP FIELDS...............................................................................11
3.1.3. FINALIZE CONTROLLER INSTALLATION.................................................................................12
3.1.4. SET CONTROLLER SWITCHES FOR NORMAL OPERATION.................................................13
INSTALL RECEIVERS........................................................................................................................................15
3.3. TESTING TIC ALARM COVERAGE AROUND THE BUILDING ....................................................15
3.4. CONNECTING TO THE HOST COMPUTER ......................................................................................16
4. WEIGAND OUTPUT SPECIFICATION....................................................................................................19
Figure 1 - Controller Operation...............................................................................................................................5
Figure 2 - "Bus" Topology Figure 3 - "Star Topology........................................................................................6
Figure 4 - Typical HALO Configuration..................................................................................................................6
Figure 5 – Antenna Field...........................................................................................................................................8
Figure 6 - HALO Controller Typical Hook-up Diagram......................................................................................10
Figure 7 - Securing the Exciter Antenna Cable .....................................................................................................12
Figure 8 – Controller Switch Identification...........................................................................................................13
Figure 9 – HALO Receiver.......................................................................................................................................15
Figure 10 – HALO Receiver Threshold and Operating Voltage Setting.............................................................15
Figure 11 – HALO Network with Host Computer..................................................................................................16
Figure 12 – Sketch of RIM.......................................................................................................................................16
Figure 13 – HALO System Grounding...................................................................................................................17
Figure 14 - Halo Wiring Diagram..........................................................................................................................18