User's Manual

Baracoda D-Fly & D-Fly2– User Guide v2.4 - 16 -
Data Capture
for Workforce
in Motion
7.4.5. Barcode Identifier
The scanner can transmit a maximum of 3 digit barcode identifier codes for different types of barcodes
(symbologies).
If the option is selected, the barcode identifier is added at the beginning of the barcode frame.
List of identifier codes can be found in the Programming Guide. You can activate barcode identifier through
BaracodaManager software or with the Programming Guide.
The barcode identifier is disabled in default settings.
7.5. Beeps and LEDs
You can enable/disable Beeps / LED Lightening using both the BaracodaManager software or the Programming
Guide.
7.6. Power management
Mutliple parameters exist to optimize the battery autonomy (“Sniff period”, “Shutdown timer”, etc…)
D-Fly/D-Fly2 works at 10 dBm (Bluetooth Class.2).
The BaracodaManager software can be used for multiple setting changes.
7.7. Low battery
An alternation of red and green blinking on the LED indicates that the battery level is low. Recharge battery
immediately. If you continue using the scanner, it will continue working until a triple beep occurs: at that
moment the reader will shut down and you will be forced to charge the scanner.