Specifications

BT11-V1.1(503)
INTEGRATION INSTRUCTIONS
1. This module has been tested and found to comply with the FCC Part15.247 for
Modular Approval.
2. This Modular Approval is limited to OEM installation for mobile and fixed applications
only. The antenna installation and operating configurations of this transmitter, including
any applicable source-based time- averaging duty factor, antenna gain and cable loss
must satisfy MPE categorical Exclusion Requirements of 2.1091. This modular should
be installed and operated with minimum distance 20 cm between the radiator& your
body.
3.
The maximum antenna gain is 0dBi.For situations where the host manufacturer is
responsible for an external connector, the integration instructions shall inform the
installer that a unique antenna connector must be used on the Part 15 authorized
transmitters used in the host product.
4. When the module is installed in the host device, the FCC ID label must be visible
through a window on the final device or it must be visible when an access panel, door or
cover is easily removed. If not, a second label must be placed on the outside of the final
device that contains the following text: ―Contains FCC ID:
2AWQ6BT11
5. The Xiamen Apt Electronic Tech. Co., Ltd uses various test mode programs for test set up which
operate separate from production firmware. Host integrators should contact Xiamen Apt
Electronic Tech. Co., Ltd for assistance with test modes needed for module/host compliance test
requirements.
6. The Xiamen Apt Electronic Tech. Co., Ltd Bluetooth module is FCC authorized for the FCC
Part15.247 listed on the grant, and that the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the Bluetooth module
grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant,
then the grantee shall provide a notice stating that the final host product still requires Part 15
Subpart B compliance testing with the Bluetooth module installed.
7.
The module is limited to use in the host.the host FCC ID is 2AWQ6CB821,product name is
thermal printer,main model is CB821-USEB.
the limited module manufacturer reviews detailed test data or host designs prior to giving
the host manufacturer approval.