XDC 6000 Watt and 12000 Watt Series DigitalProgrammable DC Power Supply Operating Manual

SCPI Command Reference
C–34 TM-XDOP-01XN
power A numeric value as defined by SCPI. May also be MAXimum or MINimum. May include power-related
suffix units such as “mW”, “uW”, “W”, etc. Range is 0 to 101% of model’s rated power.
setting_location A numeric indication of an internal set of setting registers. An integer value in the range 1 to 10.
sequence_count Number of times a sequence is to be repeated. Range is 1 to 9999.
sequence_number The name of an auto sequence program. Range is 1 to 10. The suffix is part of the SEQUENCE command
name and is not a parameter.
status-enable A 16-bit status mask for any condition register that determines which bits are to be used for synthesizing
the summary bit of that register.
step_number The step number of an auto sequence program. Possibly considered a SCPI suffix. Range is 1 to 99.
step_time The duration of an auto sequence step in the format hh:mm:ss.s.
May include time-related suffix units such as “S”, “MIN”, “mS”, “uS”, etc. By default, the value is in
seconds.
voltage A numeric value as defined by SCPI. May also be MAXimum or MINimum. May include voltage-related
suffix units such as “mV”, “uV”, “V”, etc. Range is 0 to 103% of model’s rated voltage.
Table C-16 Expressions
Expression Details
TM-XDOP-01XN.book Page 34 Monday, July 17, 2006 11:19 AM