Owner's Guide

1–4 445-0167-01-01
RS400 Features
Front Panel
\
Figure 1-1 Front panel of the RS400
Table 1-1 Front Panel Features
Feature Description
1
On/Standby Switch turns the inverter to On ( )
or to Standby ().
2 AC Input light illuminates when you are connected to shore power.
(Shore power refers to the AC input power from a utility grid,
generator or external AC source.)
3 Inverter ON light illuminates only when the RS400 is operating in
invert mode.
4 Low Battery light illuminates when your battery voltage is lower
than 10.7 volts.
5 Fault light illuminates for fault conditions such as over
temperature, output overload, or battery over voltage.
6 Supplemental Circuit Protection button trips if there is an over-
current (over 7.5 amps) or a short circuit.
7 GFCI opening enables Reset and Test monthly capability.
8 Ventilation openings provide air circulation for peak performance.
2
3
4
5
1
6
7
8