Automatic Generator Owner's Guide

Introduction
1–2 975-0082-01-01
About the Automatic Generator Start
Function and
benefits
The Xantrex Automatic Generator Start (Auto Gen Start) automatically
starts and stops your generator using dry contact relays to operate the
auto-start function of your generator. (Dry contacts operate only as
switches. The Auto Gen Start does not provide any voltage or current to
the connections.)
The Auto Gen Start continuously monitors your power system and starts
the generator if the battery voltage or state of charge reaches preset limits,
or the air conditioner or heater needs to be run. The Auto Gen Start also
starts the generator to assist the inverter/charger when power demands are
high. When properly configured, the Auto Gen Start ensures that your
power requirements are met and that your batteries stay charged.
Applications The Auto Gen Start is ideal for users who desire the convenience of
automatic generator starting when dry camping or when shore power is
otherwise unavailable.
System
component
The Auto Gen Start uses Xanbus™, a network communications protocol
developed by Xantrex, to communicate its settings and activity to other
Xanbus-enabled devices. You can configure and monitor the Auto Gen
Start and every Xanbus-enabled device in the system using a single
System Control Panel.
Xanbus-enabled products are:
• Easy to use. The Xanbus system simplifies operation and automates
routine tasks.
• Reliable. Software control eliminates errors due to analog signalling.
• Accurate. Digital information is less susceptible to interference and
line loss.
• Upgradable. Firmware upgrades mean your purchase will remain up
to date.
For detailed instructions and a complete list of Xanbus-enabled devices,
visit our website at www.xantrex.com.