Instruction manual

Technical Support: [e-mail] US: [phone] EU: [phone]
23
EDID PRESETS
EDID DIP Switch settings
1 (Down):ON
0 (Up): OFF
X: Either position - does not effect function
13iii. EDID Presets
EDID subject to DIP switch:
settings via PC deactivated
adjustment by unit DIP switch
1 2 3 4
ON DIP
EDID subject to PC: settings
via DIP switch deactivated
adjustment by PC
(Default Factory Setting)
1 2 3 4
ON DIP
EDID set to copy HDMI
OUTPUT EDID
1 2 3 4
ON DIP
EDID set to copy HDBaseT
OUTPUT EDID
1 2 3 4
ON DIP
EDID set to fix 1080p 2ch
stereo 3D
1 2 3 4
ON DIP
EDID set to fix 1080p 2ch
stereo 2D
1 2 3 4
ON DIP
Attention: Any change to EDID settings will need
a power down and power up cycle via the power
switch.
For convenience and ease of installation,
on the underside of the AMP-001-010 you
will also nd the same EDID DIP settings
as well as areas to write the Address of the
AMP unit and the Control Zone it will be
located in.