Instruction manual

Technical Support: [e-mail] US: [phone] EU: [phone]
17
ZONAL IR AND GLOBAL IR CONTROL
12iii. Global IR for Cascading Multiple Collectively
controlled AMP units
Collective Control with a single IR Receiver, Only Final AMP with IR Receiver
Global IR control of a group of AMPs by All AMPs working together in terms of volume commands
Toggle Switch Control for ARC and Personal Audio Input
HDBT IN
HDMI with ARC
U U
HDBT out
HDMI with ARC
HDBT out
Cat5e/6 Cat5e/6
Rx-70-ir-pp
hdmi (arc not supported)
hdmi with arc hdmi with arc
hdbt in
hdbt in
hdbt outhdbt out
remote controlling
master volume for all
amps
global ir. all amps
controlled together
from display at the
end of the chain
global ir. all amps
controlled together
from display at the
end of the chain
cat5e/6cat5e/6
18V PS 18V PS
18v psu 18v psu
12ii. Zonal IR for Cascading Multiple Independently
Controlled AMP units
HDBT IN
HDMI with ARC
U
HDBT out
ith ARC
HDBT out
Cat5e/6
cat5e/6
hdbt in
hdbt out
hdbt out
zoned ir
each zone with its
own ir receiver
each amp working
independantly
zoned ir
each zone with its
own ir receiver
each amp working
independantly
HDMI w
hdmi with arc
18V PSU
18v psu
18V PS
18v psu
hdmi with arc
Individual IR Receivers for Independent Operation
Independent Zonal IR control is possible for individual, daisy-chained AMPs using separate IR receivers at display
points.
Full Control of Each and Every Amp
Individual IR Receivers enables commands to be sent to AMPs separately.
IR RX
ir rx
IR RX
ir rx
IR RX
ir rx