Installation Guide

WC-2020-72-DBL

Installation Guide

HOW TO ADJUST HINGES (if required)

REQUIRED TOOLS NOT IN BOX

Tape measure

Pencil

Electric Drill

Phillips Screwdriver

Adjustable Wrench

Spirit Level

Silicone sealant

(Not all components may be included, depending upon your purchase)

●

PACKING LIST

Screws for mirror / 4

Mirror / 2 (may not be

included)

Main Cabinet / 1

Professional installation recommended.

Protect all surfaces from sharp objects,

high heat sources, direct prolonged

sunlight and chemical hazards.

Prior to installation please check received

items against the “Packing List”.

Please report any missing items to your

retailer immediately.

Counter & Sink / 1

Feet / 6

adjust depthadjust laterallyadjust heightremoveinstall

●

Backsplash comes in two pieces.

PAGE 1
● ● Prior to installation please check received items against the “Packing List”. Please report any missing items to your retailer immediately. Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards. ● Professional installation recommended. ● Backsplash comes in two pieces.
PAGE 2
INSTALLATION INSTRUCTIONS Cut hole in back of cabinet 1 Installer must cut appropriately sized hole in back of cabinet to accomodate existing placement of hot & cold wall valves & drains. 2 Adjust the adjustable feet according to the floor. (a) (b) (c) 3 Install the counter. Seal around the top of the cabinet with clear silicone sealant. Do not over apply. Allow to dry 24 hours for proper curing.