Datasheet

7.9
7.8
7.7
7.6
7.5
7.4
7.3
7.2
2014-01-08
2014-06-05
2014-01-02
2013-04-18
2013-01-22
2012-12-04
2012-10-23
2012-09-27
SSt
SSt
SSt
SSt
SSt
SSt
SSt
SSt
MHB
SSt
SSt
SSt
SMu
SSt
SMu
SMu
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
DESCRIPTION
WE-SUKW SMD EMI Suppression 5-Hole
Ferrite Bead
Order.- No.
7427511
SIZE
A4
A Dimensions: [mm] B Recommended land pattern: [mm]
C Schematic:
D Electrical Properties:
Properties
Impedance @ 25 MHz
Impedance @ 100 MHz
Rated current
DC Resistance
Test conditions
25 MHz
100 MHz
ΔT = 40K
@ 20°C
Z
Z
I
R
R
DC
Value
272
416
5.0
11
Unit
Ω
Ω
A
mΩ
Tol.
typ.
±25%
max.
max.
E General information:
Do not use this part beyond the Rated Current, as this will create
excessive heat and can harm the component
•Curie Temperature: +140°C
•Storage Temperature (on Tape & Reel): -40°C to +40°C
•Operating Temperature: -40°C to +125°C
•Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.