Datasheet

ManualsBrandsWürth Elektronik ManualsConnector AccessoriesInsulated WR-PHD Jumper with Testpoint, 3A, 1 x 2, 2.54mm Pitch

Dimensions: [mm]

13,5 ±0.15

5 ±0.15

6 ±0.15

2,54 ±0.15

2,44 ±0.15

1,4 ±0.15

Scale - 3:1

Article Properties:

Pins x2 1 x 2

Würth Elektronik eiSos GmbH & Co. KG

EMC & Inductive Solutions

Max-Eyth-Str. 1

74638 Waldenburg

Germany

Tel. +49 (0) 79 42 945 - 0

www.we-online.com

eiSos@we-online.com

CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION

METHOD

ATo 002.000 2020-07-24 DIN ISO 2768-1m

DESCRIPTION

WR-PHD Jumper with Pullback

ORDER CODE

609002115121

SIZE/TYPE BUSINESS UNIT STATUS PAGE

2.54 mm eiCan Valid from 2020-07-24 due to PCN 1/4

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH

& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety

must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

DRAFT

Summary of content (4 pages)

PAGE 1
Dimensions: [mm] 2,44 ±0.15 Article Properties: Pins x2 D 13,5 ±0.15 A R 6 ±0.15 1,4 ±0.15 2,54 ±0.15 5 ±0.15 T F Scale - 3:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ATo 002.000 2020-07-24 DIN ISO 2768-1m PROJECTION METHOD 1x2 DESCRIPTION WR-PHD Jumper with Pullback Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.
PAGE 2
Kind Properties: Properties Pitch Value Unit 2.
PAGE 3
Cautions and Warnings: Potting and Coating: The following conditions apply to all goods within the product series of the Connectors of Würth Elektronik eiSos GmbH & Co. KG: • If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the components. Expansion could damage the components. We recommend a manual inspection after potting or coating to avoid these effects.
PAGE 4
Important Notes 6. Product Life Cycle The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance.