Datasheet

DATEFILEREV BY EDV NO
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE Basic material
Projection
Drawing.- No.
c
dimension 8,4+/-0,2
14-01-31
DaF
d
Washable Definition
14-02-24
e
Pole 1 seperate
specification
14-02-25
flat actuator with top tape sealed
4181211608xx
4181211608xx.dft
09-02-24
Jelisarow
WE-SWITCH_IC-type, SMD version
2:1
System :Solid Edge V20
WE
eiCan
CAD
Würth Elektronik
eiCan
.x = +/- 0,2
.xx = +/- 0,15
A4
SIZE
11-08-26
Actuator: HB was 94V-0
a WJ
This electronic component is designed and developed with the intention for use
in general electronics equipments.
Before incorporating the components into any equipments in the field such as
aerospace, aviation, nuclear control, submarine, transportation, (automotive
control, train control, ship control), transportation signal, disaster prevention,
medical, public information network etc. where higher safety and reliability are
especially required or if there is possibility of direct damage or injury to human
body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when
used in electrical circuits that require high safety, reliability functions or
performance, the sufficient reliability evaluation-check for the safety must be
performed before by the user before usage.
11-10-26warning textb WJ
DaF
DaF
6,00 ±0.10
1,40 ±0.03
0,9 Travel
A u0.2
0,60 ±0.03
2,54 ±0.03
3,20 ±0.10
7,62 ±0.20
9,70 ±0.3
0,25 ±0.02
2,54 ±0.03
6,60 ±0.20 11,00 ±0.3
1,10
Wiring Diagram
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Contact Rating:
Switching: 25mA, 24VDC
Non-Switching: 100mA, 50VDC
>Contact Resistance:
Initial: 50mOHM max.
After Life Test: 100mOHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength: 500VAC for 1 minute
>Operating Force: 1000g max.
>Mechanical Life: min. 5000 cycles
>Electrical Life: 2000 cycles / 25mA, 24VDC
>Flat Actuator with top tape sealed
MATERIAL
>Cover: PPS UL 94V-0, color Black
>Base: PPS UL 94V-0, color Black
>Actuator: PA 46 UL HB, color White
>Tape: Polyimide Film
>Contact: Gold Plated
>Terminal: Gold Plated
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
3 cycles max.
>Keep in "off" position during soldering
>For cleaning or washing only with top tape sealed
>VPH Heating Process only with top tape sealed
WASHABLE DEFINITION
Please do not submerse washable products into water or cleaning agents
or put them in locations exposed to water or liquids completely.
When cleaning by hand (brushing), please do not use excessive force on
our switch to avoid malfunction afterwards, because you could deform
function relevant areas or you could damage sealing functions.
Do not clean washable series immediately after soldering. The cleaning
agent may be absorbed into the switch through respiration while the
switch cools.
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel packaging
>On delivery in "off" position
Pole 1 please refer separateness specification.
DIMENSION
No.Of Pole 2 3 4 5 6
Dim. A (mm) 5.52 8.06 10.60 13.14 15.68
No.Of Pole 7 8 9 10 12
Dim. A (mm) 18.22 20.76 23.30 25.84 30.92
h 0,10 Ref.
Scale - 2:1
0,50 ±0,100,40
8,4 ±0,2
Pole 1 please refer separateness specification.