User's Manual

FLITELINE AVIONICS SYSTEM
PILOT’S GUIDE
Page 60 Publication No. 150-047012
Dec 2005 Rev. D
Operating the CTR-352
ARINC-410 (Octal) Interface
1. Set the MODE SELECTOR to ON.
2. If the code displayed is not the one desired, rotate the CURSOR CONTROL until the ATC Code
surrounds CURSOR BOX. Rotate the right inner knob to adjust the lower two digits from 00-77. Rotate
the right outer knob to adjust the upper two digits from 00-77.
3. If the VFR code is desired press and hold the right pushbutton until “1200” is displayed.
4. To enable Altitude Reporting on aircraft equipped with an optional digitizing pressure encoder rotate the
MODE SELECTOR to ALT.
5. If it becomes necessary to suppress all replies from the ATC ground station, rotate the MODE
SELECTOR to SBY.