SAFETY AND OPERATING MANUAL Original instructions Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.
General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 2 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear eye protection Wear ear protection Wear dust mask Do not expose to rain or water Do not burn 4 Do not dispose of batteries. Return exhausted batteries to your local collection or recycling point Li Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.
1 2 3 4 8 7 6 5 11 9 13 12 10 Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.
1. Dust Protection Cap 2. Tool Holder Locking Sleeve 3. Forward And Reverse Rotation Control 4. On/Off Switch 5. Carabiner Clip hook 6. Battery Pack 7. Battery Pack Release Button 8. Function Mode Selection Switch 9. LED Light 10. Screwdriver bits * 11. SDS drill bits * 12. HSS drill bit * 13. Keyless chuck with SDS adaptor* * Not all the accessories illustrated or described are included in standard delivery. 6 Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.
TECHNICAL DATA Type WX382 WX382.1 WX382.2 WX382.3 WX382.4(3- designation of machinery, representative of Hammer Drill) Model No. WX382 WX382.1 WX382.2 WX382.3 Voltage 12V No load speed 0-900/min Impact rate 0-4800bpm Impact energy 1.0J Battery type Li-Ion Powershare (WA3503) Charger time 3hr Battery capacity 3hr 30min 3hr 1 1 1.3Ah Li-Ion Battery pack quantity Max. drilling capacity WX382.4 1 2 Steel 8mm Wood 10mm Masonry 10mm Machine weight (without battery) 1.
The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design and these instructions. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job.
ACCESSORIES Model No. WX382 WX382.1 WX382.2 WX382.3 WX382.4 Battery charger 3hrs (WA3725) 1 / 1 30min battery charger (WA3846) / 1 / Battery pack (1.3 Ah Li-Lon) 1 2 Keyless chuck with SDS adaptor HSS drill bits Screwdriver bits SDS drill bits 1 1 2 (5mm,6mm) 3 (5mm, 6mm,8mm) 2 (5mm,6mm) 9(PH1/PH2/ 4(PH2*50mm,P PH3*50mm, Z1*50mm,PZ2* PZ1/PZ2/ 4(PH2*50mm,PZ1*50mm,PZ2*50mm, 50mm,Slotted* PZ3*50mm, Slotted*5.5mm*50mm) 5.5mm*50mm) Slotted*4.5/5.5 /6.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for hammer drilling in concrete, brick and stone. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving.
— REMOVING (See Fig. B3) Retract back the bit holder locking sleeve (2) and pull out the bit. WARNING: Your new WORX Rotary Hammer Drill generates powerful forces to get your job done quickly and effectively. These forces may cause inferior quality SDS bits to break and jam in the chuck, We therefore recommend that only high quality SDS bits be used with this tool. 2. INSERTING A TOOL INTO CHUCK (13) (See Fig. C) To open the chuck jaws rotate the front section of the chuck while holding the rear section.
6. FUNCTION MODE SELECTION (See Fig. E) The operation of the gearbox for each application is set with the function mode selection switch (8). To change between functions, depress the unlocking button (15) and rotate the selector to the desired operating mode. For simultaneous drilling and impacting of concrete or masonry, choose the Hammer drilling position. 15 E For screw driving, drilling into steel, wood and plastics choose the Rotary drilling position.
condition. Where possible use a pilot hole before drilling a large diameter hole. PROBLEM SOLUTION REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES Charging time problems, having not used a battery pack for a prolonged time will reduce the battery pack working time. This can be corrected after several charge and discharge operations by charging & working with your drill. Heavy working conditions such as large screws into hard wood will use up the battery pack energy faster than lighter working conditions.
DECLARATION OF CONFORMITY We, Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product, Description WORX Cordless rotary hammer Type WX382 WX382.1 WX382.2 WX382.3 WX382.
www.worx.com Copyright © 2013, Positec. All Rights Reserved.