Manualshelf

Use and Care Manual

ManualsBrandsWorld Imports ManualsBathroom Lighting4-Light Chrome Bath Bar Light
12345678910
Installation
Installing the bulb
A
B
Install the bulb (B) into the socket of the track head (A).
Ground tab
Ground groove
Ground side of connector
A
4
C
Track (sold separately)
Installing the track head to the track
2
1
Push the top portion of the track head (A) connector into the slot of the track section.
Pull down the connector’s locking tab (C).
Twist the ground side of the track head (A) connector toward the ground side of the track section until
the track head (A) connector snaps into place.
NOTE: The ground side of the track head (A) connector is the side with two metal tabs. The
ground side of the track section has an indented groove on the face and two internal copper strips.
The track head (A) can only be assembled if the ground sides of the track head (A) connector and
the track section are aligned.
□
□
Identify the ground side on the track head (A) connector and track section (sold separately).
□
□
□