Specification Sheet
VERDEdri
™
Hi-Speed Surface-Mounted ADA Compliant Hand Dryers
Electrical specications:
Cover options:
Cast Aluminum - with epoxy paint (white or black).
Stainless Steel - with polished or brushed nish
110-120 V / 208 V / 220-240 V
Amps 8.3
Watts 950
Hz 50/60 Hz
VERDEdri
™
is a high speed, surface-mounted ADA compliant hand dryer featuring
HEPA ltration system and antimicrobial technology. VERDEdri is extremely
energy efcient utilizing only 950 watts of power. The adjustable two speed motor
controls and global universal voltage features accommodate any commercial
washroom environment.
Product Benets
• 12 second dry time
• Automatic surface-mounted ADA compliant simplies installation and
reduces installation costs
• High intensity single port nozzle
• Energy efcient utilizing only 950 watts of power
• HEPA
*
lter reduces contaminates in the air when hand drying
• Adjustable two speed controls to customize drying time, sound level and
energy savings
• Universal voltage – accepts 110-120 / 208 / 220-240 VAC input
• Incorporates SteriTouch
®
antimicrobial technology inhibiting the growth of
bacteria, mold and fungus extending the dryer’s service life
• IP24 rating - protection against harmful water ingress
• Replaceable motor brushes extends product life
• Optional adapter kit
1
for top-entry surface-mounted conduit
• Durable and vandal resistant
Cover Material Cover Finish / Kit
110-120 / 208 /
220-240 V
Unit Weight Shipping Weight Unit Size (HxWxD) inch/mm Shipping Size (HxWxD) inch/mm
Aluminum White Q-974A 9.8 lbs / 4.4 kgs 11.9 lbs / 5.4 kgs 13.3” x 11.6” x 3.9” 339 x 295 x 100 14.2” x 16” x 6.7” 360 x 405 x 170
Aluminum Black Q-162A 9.8 lbs / 4.4 kgs 11.9 lbs / 5.4 kgs 13.3” x 11.6” x 3.9” 339 x 295 x 100 14.2” x 16” x 6.7” 360 x 405 x 170
Stainless Steel
Polished Q-972A 11.3 lbs / 5.1 kgs 13.4 lbs / 6.1 kgs 13.3” x 11.6” x 3.9” 339 x 295 x 100 14.2” x 16” x 6.7” 360 x 405 x 170
Stainless Steel
Brushed Q-973A 11.3 lbs / 5.1 kgs 13.4 lbs / 6.1 kgs 13.3” x 11.6” x 3.9” 339 x 295 x 100 14.2” x 16” x 6.7” 360 x 405 x 170
Optional Top Entry Adapter Kit 17-10310 3.8 lbs / 1.7 kgs 5.2 lbs / 2.3 kgs 13.4” x 14.3” x 1.2” 339 x 364 x 30 14.8” x 16” x 4.5” 375 x 405 x 114
HEPA Filter 93-10292K 0.4 lbs / 0.9 kgs 0.7 lbs / 1.5 kgs 9” x 3.3” x 3” 229 x 84 x 76 9.4” x 3.5” x 3.5” 240 x 90 x 90
VERDEdri
™
hand dryer shall be manufactured by World Dryer Corporation
to include a cover constructed of either die-cast aluminum nished with
epoxy paint or stainless steel. The wall mounting plate shall be constructed
of die-cast aluminum nished with chrome plating. Epoxy painted covers
and molded plastic components shall incorporate SteriTouch
®
antimicrobial
technology inhibiting the growth of bacteria, mold and fungus extending the
dryer’s service life. The cover shall be attached to the wall mounting plate
with tamper-proof screws. Motor shall be a thermally-protected universal
brush type motor operating at 31,000 RPM and delivering 64 CFM air
ow at a velocity of 225 MPH (19,800 LFM). Motor shall have replaceable
brushes for extending service life. Dryer shall incorporate universal controls
accepting 115 / 208 / 230VAC input. Dryer will incorporate a nichrome wire
heating element protected by an automatic resetting thermal cutoff. Dryer
will include a replaceable HEPA (high efciency particulate air) lter. Dryer
shall be activated by an automatic infrared sensor with a 30 second vandal
shut-off. Control board shall contain a HI / LOW speed control switch. Dryer
shall provide an exit air temperature of 130°F at an ambient temperature
of 70°F. Dryer shall have an ingress protection rating of IP24. Hand dryer
shall be surface-mounted ADA (Americans with Disabilities Act) compliant
and certied to standards of safety by Underwriters Laboratories, Inc. and
Canadian Standards Association.
Architecture & Engineering Specications
*
HEPA lter removes a minimum of
99.97% of contaminants 0.3 microns in
size or larger.
1
The top entry adapter is used in conjunction with the
VERDEdri hand dryer where top entry surface mounted
electrical conduit connections are required.