DIGITAL CALIPER GAUGE MANUAL AFTER SALES SUPPORT GB IRE 0800 / 328 6020 00800 / 4467 5888 info@dariolondon.
Table of contents 03 03 04 05 06 06 07 08 09 11 12 13 15 15 16 19 Scope of delivery Technical data Assembly diagram Safety instructions Functions Maintenance/Storage Use Insertion of the battery Instructions for batteries Fault rectification Measurements Support table Environmental protection/disposal Conformity declaration Warranty Warranty card AFTER SALES SUPPORT 2 0800 / 328 6020 info@dariolondon.
Assembly diagram 1. 2. 3. 4. 5. 6. 7. 8. Safety instructions Staged measuring surface 9. Depth bar Inner measuring surface 10. Outer measuring surface LCD display 11. Power on and off Safety screw switch (ON/OFF) Button cell (1.5 V) 12. Zero gauge (ZERO) Battery lid 13. Switch for metric / inches Slider (mm/inch) Protective cover 14. Fine-tuning wheel 1 2 3 4 5 6 7 8 9 • Injury hazard: The measuring edges are sharp and pointed! Therefore, only hold the measuring device on the handles.
. Preferably store the caliper gauge in the case in order to provide optimum protection. Functions 1. The zero setting in any position simplifies stage measurements. Press the zero gauge (ZERO) in order to define the zero point. This enables difference measurements (negative measurements are displayed with a „- “). 2. Inch/mm conversion in any position. Press the mm/inch key in order to display the measurement result in a different unit. 3.
(4) Press the On/Off key in order to switch off the power; if the slider is no longer used after the end of the measurements, the display will switch off after approx. 4-5 minutes. Inserting the battery An abnormal display (flashing numbers or no display at all) indicates a low battery voltage and the battery must be replaced. Remove the battery lid in the direction of the arrow and insert the battery or replace a used battery with a new one.
• Avoid contact with eyes or skin. Immediately rinse areas affected by the battery acid with plenty of clean water and seek medical advice. • Remove the batteries from the device in the case of longer periods of disuse. Battery disposal • Batteries and rechargeable batteries are not permitted to be disposed of with household waste! • Every consumer is legally obligated to submit batteries and rechargeable batteries to the collection centre of his local authority, district or to retailers.
Measurements a) Outer measurement c) Inner measurement a) b) Support table b) Depth measurement d) Staged measurement c) d) Tip Use the fine-tuning wheel for precise measurements. It simplifies the precise setting of the caliper gauge. AFTER SALES SUPPORT 12 0800 / 328 6020 info@dariolondon.com 00800 / 4467 5888 GT-DC-02, 02/13, E45316 Practical support table for cutting threads (also see the back of the caliper gauge): Column 1: Screw size Column 2: Thread pitch Column 3: Min.
Ø in 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Gg/in 20 18 16 12 11 10 9 8 Whitworth Ø mm 4,72 6,13 7,49 9,99 12,92 15,8 18,61 21,34 Ø mm 5,0 6,4 7,7 10,25 13,25 16,25 19 21,75 Environmental protection/ disposal In the interest of the environment, dispose of the caliper gauge properly. Do not throw the caliper gauge into household waste, but rather, submit it to a collection centre for electrical waste. Remove the battery beforehand and dispose of it properly in a collection container for batteries.
Warranty Model: Digital caliper gauge The appliance has been manufactured with the greatest care. The warranty period is three years from the date of purchase. Please retain the sales receipt as proof of purchase as without it the warranty claim cannot be processed. During the warranty period, the sales receipt and the completed warranty card with a description of the fault must be returned once you have contacted the service centre by phone. A new appliance will be returned.
DIGITAL CALIPER GAUGE Your details: Name _____________________________________________ Address ____________________________________________ ___________________________________________________ ___________________________________________________ ___________________E mail________________________ Date of purchase*___________________________________ * We recommend you keep the receipt with this warranty card Location of purchase_________________________________ Description of malfunction: Return your completed