IMPORTANT SAFETY INFORMATION WARMONGERING ALL INSTRUCTIONS BEFORE USING WARNING — Any alteration 1o the design of this energizer may cause serious electrical shock and may void the warranty. 1. Install the energizer and the electric fence according to these installation and operating instructions. 2. Mount electric fence signs in visible areas {o identify the electrified wire{s). 3.
This could be inside a building or purpose-built enclosure. The location you choose should be accessible to the power source and as close to the electric fence as possible. The energizer can be mounted on the wall or pane! using broad-headed screws or can be set on a secure shelf.
» . Plug the connector on the solar . Connect the power cord {o the bat Energizer {Bear View) / S&fi/ Solar Panel . Place the solar pans! mounting bracket over the handle so that the wing nuts face the back of the energizer not remove the wing nuts. With the wing nuts loose, slide the solar panel into mounting bracket from the side fount centered. Securely lighten the two wing nus on the back of the mounting bracket, panel cord inch the mating connector on the power cord under the energizer dousing.
trayecto de la puesta a tierra, ¢ ses, la tierra. Desde luego, el animal proporciona el aislaban final para completar el trayecto eléctrica Un sistema de cercada eléctrico presenta una barrera mental al animal en vez de una barrea física. Una vez que ef animal haya recibid la descarga eléctrica, respetar la cerca debido al terno de lora descargar, aunque no esté afiladera.