Owner's manual

ManualsBrandsWoodhaven ManualsTools5301: 5" Plate Kit

ASSEMBLY

Remove your routers existing base

plate and attach the router plate (5300P)

in its place. There is a partially drilled hole

(H) in the router plate that is used to orient

it to select the mounting holes for the

plunge base of your Bosch 1617-18

(B), DeWalt 616-618 (D) or Porter

Cable 690-892 (PC) router. Use

the screws we supply (MF035,

MF054 or MF058) to mount

your router to the router plate.

We have an undrilled router

plate available (5300PD - not

shown) if you have a different

router you need to mount.

5301

Plate Kit

Please Read Carefully!

ing ba

(5300P)

drilled hole

ed to orient

or the

-18

ter

Parts List:

Part Description Quantity

5301B 5" Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

5300C Center Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

5300P Router Plate, pre-drilled . . . . . . . . . . . . . . . . . . . . . . . . 1

5300V Vac Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

MP150 1/4-20 x 1-1/2" screw . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

WS002 washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

HB020 1/4-20 x 3/4" bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

PIN450 1/4" center pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

MF035 10-24 x 1/2" screw, Porter Cable, bagged . . . . . . . . 3

MF054 8-32 X 1/2" screw, DeWalt, bagged. . . . . . . . . . . . . . . 3

MF058 4mm x 12mm screw, Bosch, bagged . . . . . . . . . . . . . 3

BEFORE BEGINNING

Identify and verify that you have all the parts

listed. Read thru the instructions at least once,

familiarizing yourself with the parts and process before

proceeding. You'll need a #3 Phillips screwdriver

and a 7/16" socket wrench for assembly.

The 5201 Plate Kit is

designed to work with the

5380K MDF Door Kit and

5320-5360 Templates.

Attach both vac outlets

(5300V) to the 5"

base using the 1-1/2"

screws (MP150).

Summary of content (2 pages)

PAGE 1
5301 Plate Kit Please Read Carefully! BEFORE BEGINNING 1 Identify and verify that you have all the parts listed. Read thru the instructions at least once, familiarizing yourself with the parts and process before proceeding. You'll need a #3 Phillips screwdriver and a 7/16" socket wrench for assembly. Parts List: Part Description 5301B 5300C 5300P 5300V MP150 WS002 HB020 PIN450 MF035 MF054 MF058 Quantity 5" Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Center Disk .
PAGE 2
ASSEMBLY 3 Install the 1/4" center pin (PIN450) in your routers 1/4" collet and tighten. With the router setting on a work bench and the router plate facing up, set the 5" base (5301B) on the router plate. Set the recessed portion of the center disk (5300C) in the opening of the base as you slide it onto the center pin. Orient the base so the router controls and handles will be in a comfortable location for you. Install a washer (WS002) on each of the 3/4" bolts (HB020).