Cut Sheet
6
Catalog No./Item Description/Specifications
Base and Cover
NM2003 Supporting Clip –Mount to
surface with No. 8 flathead
screw. Use with NM2000 Series.
W30 Pressure-Type Wire Connector –
For common connection of two,
three, or four No. 12 or No.14 solid
copper conductors. Not for
connection of equipment grounding
conductor. 300V maximum; 20A
60° C maximum. Not for use with
aluminum conductors.
NM2006 Cover Clip – For covering
joint where lengths of cover
or base adjoin. Use with
NM2000 Series.
NM2011 90º Flat Elbow – For right
angle turns on same surface.
Catalog No./Item Description/Specifications
NM2017 Internal Elbow – For right
turns at inside corners.
NM2018 External Elbow – Used
for making 90º turns at
outside corners.
NM2010A Entrance End – Has 1/2" trade
size KO on end and bottom. Use
with NM2000 Series.
NM2010B Blank End Fitting – Use with
NM2000 Series.
NM2000 Series
2"
[51mm]
1 3/4"
[44mm]
1 1/2"
[38mm]
1 3/8"
[35mm]
1"
[25mm]
1"
[25mm]
2 11/16
[68mm]
1 7/8"
[48mm]
3 3/16"
[81mm]
2"
[51mm]
2"
[51mm]
1 7/8"
[73mm]
2"
[51mm]
1 5/8"
[41mm]
ITEM CAT NO. LENGTH MATERIAL
Base NM2000B 8' [2.4m] PVC-Ivory
Cover NM2000C 8' [2.4m] PVC-Ivory
Base & Cover NM2000BC 5' [1.52m] PVC-Ivory
Catalog No./Item Description/Specifications
AL2043IG In-line Isolated Ground
Receptacle – Two 15A,
120V factory wired, isolated
ground, orange receptacles.
Couplings furnished.
AL2044 Deep Device Box – For
AL2044-2 receptacles and deep devices
such as those of signal and alarm
systems. Base has open back
plate for mounting to existing
wall box and solid back plate
insert with 1/2" and 3/4" KO
to close opening.
Catalog No./Item Description/Specifications
AL2047 Shallow Switch and
Receptacle Box – Designed for
standard shallow switches and
receptacles. Base has open back
plate for mounting to existing
wall box and solid back plate
insert with 1/2" and 3/4" KO
to close opening.
AL2446P-D Duplex Receptacle Cover
Plate – For in-line mounting
of commercially available
duplex receptacles.
AL Series
(Continued)
6"
[152mm]
6"
[152mm]
W
L
D
L
W
D
CAT NO. L W D GANG #
AL2044 4 5/8" [117mm] 3 1/16" [73mm] 2 1/4" [57mm] 1
AL2044-2 4 5/8" [117mm] 4 27/32" [121mm] 2 1/2" [64mm] 2
CAT NO. L W D GANG #
AL2047 4 5/8" [117mm] 3 1/16" [73mm] 1 3/8" [35mm] 1
AL2047-2 4 5/8" [117mm] 4 27/32"[121mm] 1 3/8" [35mm] 2
1 3/4"
[44mm]
3 3/8"
[86mm]
1 1/2"
[38mm]
1 9/16"
[40mm]
1 3/4"
[44mm]
3 13/16"
[97mm]
1 3/4"
[44mm]
1 15/16"
[49mm]
1 1/16"
[27mm]