Cut Sheet

16
Catalog No./Item Description/Specifications
AL2000 Base and Cover – 6063-T5
AL2400 extruded aluminum, satin
anodized finish, .060"
[1.5mm] nominal thickness.
Product Description/Specifications
Aluminum All USB Plugmold Available in 3' [914mm], and 5' [1.5m] lengths with 12" spacing. USB is 2.4 Amps (shared between
two ports) 5VDC. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank
End Fittings.
Aluminum Alternating Available in 5' [1.5m] length with 9" spacing. 15A tamper-resistant receptacles. 3-wire, #12
USB Plugmold THHN (1 hot, 1 neutral and insulated ground conductor). Packed two per carton. Each unit
supplied with one (1) Coupling and two (2) Blank End Fittings. USB is 2.4 Amps (shared
between two ports) 5VDC.
Please note the charging load on one module will not affect the charging
performance of the other USB modules in the product.
Plugmold AL2000 Series Aluminum Multioutlet Systems Ordering Information (continued)
AL20USB312 Aluminum 3' [915mm] USB 12" [305mm] 3 USB Modules
AL20USB512 Aluminum 5' [1.5m] USB 12" [305mm] 5 USB Modules
CATALOG NO. FINISH LENGTH WIRING CENTER DISTANCE OUTLETS
Feet [mm] CONFIG Inches [mm] QUANTITY & TYPE
AL20GB509TRUSBA Aluminum 5' [1.5m] GB/USB 9" [229mm] 3 Outlets/3USB Modules
CATALOG NO. FINISH LENGTH WIRING CENTER DISTANCE OUTLETS
Feet [mm] CONFIG Inches [mm] QUANTITY & TYPE
1 7/16"
[37mm]
1 1/8"
[29mm]
1 7/16"
[37mm]
1 1/8"
[29mm]
NOTE: AL2000 Series Aluminum Plugmold products are available in an anodized finish with gray receptacles. IG receptacles are orange.
All AL2000 Series Plugmold products include two (2) AL2010B Blank End Fittings and one (1) AL2001 Base Coupling unless
otherwise indicated in the product desciption.
AL2000/AL2400 Series Raceway Fittings Ordering Information
ITEM CAT. NO. LENGTH MATERIAL
Base AL2000B-5 5' [1.5m] .060 Aluminum
Cover AL2000C-5 5' [1.5m] .060 Aluminum
Base AL2000B-10 10' [3.m] .060 Aluminum
Base AL2400B-5 5' [1.5m] .060 Aluminum
Cover AL2400C 5' [1.5m] .060 Aluminum
Base AL2400B-10 10' [3.m] .060 Aluminum
1 7/16"
[37mm]
1 1/8"
[29mm]
Cross-Sectional Area:
1in
2
[645mm
2
]
Catalog No./Item Description/Specifications
AL2003 Supporting Clip – Mount to
surface with No. 8 flathead
screws. Use with AL2000
Series.
AL2000WC Wire Clip – Holds conductors
AL2400WC in place in raceway
(nonmetallic).
1 7/16"
[37mm]