Cut Sheet

ManualsBrandsWiremold ManualsConduit/Raceway Tools6000 BASE CUTTER

WIREMOLD

Steel Raceway

FEATURES & BENEFITS

ED530R18 – Updated April 2017 – For latest specs visit www.legrand.us/wiremold

6000

Series Raceway can be used divided for separate

wiring circuits or multi-service applications. For large

cabling installations, 6000 can be used undivided as

headers and feeders or to bring wiring to a specified

location. 6000 Series Raceway is ideal for all applications

requiring a high cable capacity, dual service steel

raceway. Commercial, institutional, and industrial

applications all beneﬁt from the 6000 Series rigid steel

construction and durable Ivory ScuffCoat

™

ﬁnish. 6000

Series Raceway is also ideal for municipalities that require

either all steel construction or prohibit nonmetallic cable

management systems.

Large Capacity, Two-Piece Steel Surface Raceway

n Steel raceway. Provides superior strength for any dry

interior location installation.

n Extra large cross sectional area. Provides space for large

wiring requirements or installations that use large diameter

cable for power and/or data/communications.

n Dividable raceway base. Snap-in divider creates two-

compartment raceway. For bringing large amounts of power

and data/communications cable to one location.

n Complete line of ﬁttings. Provides complete wiring solution

and allows for interconnection between raceway systems.

n Gray baked enamel and Ivory ScuffCoat ﬁnish. Enamel

ﬁnish assures durability; can be easily overpainted. Durable

Ivory Scuffcoat ﬁnish makes a scratch resistant surface.

n Installs as a feeder or header raceway. Ideal for overhead,

open spaces and underﬂoor applications.

n Accommodates large size devices. Large size raceway

accepts single- and dual-gang devices up to 100 amps and

circuit breakers up to three pole.

n Pre-cut covers for standard outlet center locations. For

mounting devices on various centers without cutting the

covers which reduces number of ﬁeld cuts for labor savings.

n Base and cover cutters. Manually operated cutters are

lightweight and portable. Cutters offer labor savings for any

size job and maintain a factory clean and square cut.

n Communication connectivity options. Accepts industry

standard and proprietary devices from a wide range of

manufacturers to provide a seamless and aesthetically

pleasing interface for voice, data, audio, and video

applications at the point of use.

n ADA compliant. Raceway and ﬁttings can be installed in

conformance with ADA requirements.

n UL Listed and CSA Certiﬁed. Raceway UL ﬁle E4376 Guide

RJBT, CSA ﬁle LR350. Fittings UL ﬁle 41751 Guide RJPR,

CSA ﬁle 350 and 48952.

6000

Series Raceway shown as a divided system with Activate inserts

and power device with a 4050 device bracket.

4047 Series Faceplates accommodate a wide range of power and

communications applications.

Download this product’s PEP ecopasport

environmental product declaration at

www.legrand.us/resources-and-downloads.

This declaration conforms with ISO 14025 and

14040 and is in alignment with EN 15804.

Summary of content (12 pages)

PAGE 1
WIREMOLD® Steel Raceway Large Capacity, Two-Piece Steel Surface Raceway 6000® Series Raceway can be used divided for separate wiring circuits or multi-service applications. For large cabling installations, 6000 can be used undivided as headers and feeders or to bring wiring to a specified location. 6000 Series Raceway is ideal for all applications requiring a high cable capacity, dual service steel raceway.
PAGE 2
6000 Series Raceway System Layout G6046KD G6017TX G6014A G6007C-2 G6007C-1 G6017TX G6011TX G6010B G4050 NOTE: Illustration is for showing single service product application only. 6000 Raceway Wire Fill Capacity for Power NUMBER OF CONDUCTORS (40% FILL) WITH DUPLEX WITH SURGE/ LARGE SINGLE WIRE SIZE O.D. WITHOUT DEVICES RECT. DEVICES THHN/THWN inches (mm) 1.59 in.2 (1025mm2) UNDIV. DIVIDED UNDIV. DIVIDED 14 AWG 0.111 (2.8) 659 296 528 231 12 AWG 0.130 (3.
PAGE 3
6000 Series Raceway Ordering Information Catalog No./Item V6000B-10 G6000B010 3 9/16" (90mm) Catalog No./Item Description/Specifications 6001A 3 5/16" Base – .060" (1.5mm) galvanized steel. Packed two 10' (3m) lengths per carton. Base has two 9/32" diameter trade size KOs 1 1/4" (32mm) from each end and on centers of approximately 18" (457mm) throughout. G6000WC 1 1/2" Cover – 040" (1.0mm) galvanized steel. Packed four 5' (1.5m) per carton.
PAGE 4
6000 Series Raceway Ordering Information Catalog No./Item V6006 G6006 Description/Specifications Catalog No./Item Connection Cover – Use where two sections of 4000 or 6000 Series Raceway Cover, not squarely cut, come together. V6074 G6074 1" (25mm) 1 3/4" (44mm) V6010B G6010B Description/Specifications Take-Off Connector (6000 to 6000) – For 90° tee connection at any point along a run of 6000.
PAGE 5
4047 Series Cover Plates Ordering Information Catalog No./Item V4047AX G4047AX 4 3/4" (121mm) m m Description/Specifications Catalog No./Item Two-Gang Overlapping Cover Single Round Opening – For straight blade and locking single receptacles with face diameters of 1.38" to 1.39" (35mm to 36mm). V4047BT G4047BT 4 3/4" (121mm) m m Description/Specifications Two-Gang Overlapping Cover Duplex & TracJack Mini Adapter – For 15A and 20A duplex receptacles. Includes Mini adapter.
PAGE 6
4047 Series Cover Plates Ordering Information (continued) Catalog No./Item V4047WX G4047WX 4 3/4" (121mm) Catalog No./Item Description/Specifications V4047-2BBFF G4047-2BBFF 4 3/4" (121mm) 9 1/2" Two-Gang Overlapping Cover with One Duplex Receptacle Installed – Includes one Pass & Seymour Duplex Receptacle with 12" wire leads installed on bracket.
PAGE 7
4047 Series Cover Plates Ordering Information (continued) Catalog No./Item V4047-2WWFF G4047-2WWFF 4 3/4" (121mm) 9 1/2" (241mm) m m V4047-2WWMM G4047-2WWMM 4 3/4" (121mm) 9 1/2" (241mm) m V4047-2WWSS G4047-2WWSS 4 3/4" (121mm) 9 1/2" m m (241mm) m Description/Specifications Catalog No.
PAGE 8
4047 Series Configurable Cover Plates Number Logic 1. For “X”, Choose one of the following options: 2. Choose a Plate Configuration: Two-Gang Plate: X 4047 Y Y 1 2 V G CV CG Ivory & UL Listed Gray & UL Listed Ivory & cULus Listed (Canada only) Gray & cULus Listed (Canada only) Four-Gang Plate: 1 4047-2 X Y Y Y Y 1 2 2 3 4 1 2 3 4 3. For “Y”, Choose any combination of configurations from the options listed below: A. 1.41" (35.8mm) Diameter, Single Round Receptacle J. 1.
PAGE 9
Communication Endplates Ordering Information Catalog No./Item Description/Specifications Catalog No./Item ARA-S2* Angled Raceway Adapter – For use with 4050 device brackets and WallSource device mounting brackets. Angled exit provides additional mounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two Ortronics® Series II modules.Fits 5507 Series Faceplate opening.
PAGE 10
V/G4050 & 5507 Series Faceplates Ordering Information Catalog No./Item V4050* G4050* 4 11/16" (119mm) 7/16" (11.1mm) 6" (152mm) Catalog No./Item Description/Specifications Device Mounting Bracket – High impact plastic mounting bracket and trim plate which overlap raceway cover providing a seamless transition.
PAGE 11
NOTES 11
PAGE 12
NOTES NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.