Installation Manual

5400 Series Surface

Nonmetallic Raceway System

INSTALLATION INSTRUCTIONS

Wiremold Electrical Systems conform to and should be installed and prop-

erly grounded in compliance with requirements of the current National

Electrical Code, Canadian Electrical Code or codes administered by local

authorities.

All electrical products may represent possible shock or fire hazard if

improperly installed or used. Wiremold electrical products are UL listed.

Made for interior use only and should be installed in conformance with

current local and/or the National Electrical Code.

Recommended Cutting Tools & Fasteners*

Miter Saw

5400TB

5400C

5400TBD

5400TC

#8 [5/16", 7.9mm Head Size]

Pan Head Screw

* Not supplied.

PAGE 1
Wiremold Electrical Systems conform to and should be installed and properly grounded in compliance with requirements of the current National Electrical Code, Canadian Electrical Code or codes administered by local authorities. All electrical products may represent possible shock or fire hazard if improperly installed or used. Wiremold electrical products are UL listed. Made for interior use only and should be installed in conformance with current local and/or the National Electrical Code.
PAGE 2
Typical Installation Layout 2 1 5400WC 18" 48" 5400TWC 5400TB/5400TBD 3 4 5406TB 5400C 5406A 5410 5406T 5400TC 5 5410D
PAGE 3
6 7 5418 5417 8 9 5411 5415 10 5474
PAGE 4
11 ➮ 5407T 2 1 1 4 3 ➮ 5407T 12 5407A3 3 2
PAGE 5
13 5407 Disassembly 14 A. B. C. E. D. F.
PAGE 6
5400 RACEWAY WIRE FILL CAPACITIES FOR COMMUNICATION (DIVIDED)* CABLE/WIRE SIZE UNSHIELDED TWISTED PAIR 4-pair, 24 AWG Cat 5 UTP 4-pair, 24 AWG Cat.3 UTP O.D. Inches [mm] 0.220 [5.6] 0.190 [4.8] TELEPHONE 2-pair, 24 AWG 3-pair, 24 AWG 4-pair, 24 AWG 25-pair, 24 AWG 0.140 0.150 0.190 0.410 [3.6] [3.8] [4.8] [10.4] 22 19 12 2 24 20 13 2 48 42 26 5 45 39 24 5 48 41 26 5 96 84 52 11 COAXIAL RG58/U RG59/U RG62/U RG6/U 0.195 0.242 0.242 0.270 [5.0] [6.1] [6.1] [6.