Submittal Sheet

Tel: 1-800-WINTERS / www.winters.com WINTERS INSTRUMENTS
Thermometers
Direct Reading Bi-Metal Dial Thermometer (TBM)
1. The thermometer case shall have a 2” (50mm), 3” (75mm), 4” (100mm), 5” (125mm) or
6” (150mm) dial and be anti-parallax dish-shaped, non-reflective silver colour with black
markings. It will come with an external recalibration screw on the back of the dial. The
stem shall be 2.5” (63mm) or greater with a 1/4” or 1/2” NPT connection.
2. Thermometer stem shall be lower mount, centre back mount or fully adjustable.
3. The stem will be able to withstand 125 psi of pressure without a thermowell.
4. Accuracy to be ±1% of full scale.
5. The thermometer enclosure rating to be rated as IP68 and hermetically sealed.
6. Manufacturer’s Series or Model number to be marked on the dial (above the pointer) and
the socket to be stamped with the manufacturer’s batch code.
7. The manufacturer is to provide a 5 year product warranty.
8. Bi-metal thermometer to be Winters TBM Series or approved equivalent.
Direct Reading Liquid-in-glass Scale Thermometer (
TIM, TIM-LF)
1. The thermometer case shall be 9” (230mm) high and be constructed of black painted
aluminum or Valox®. It shall be dual scale (F & C) with a tapered cast aluminum graphite
filled bulb chamber. The tube shall have a green organic (non-mercury) fill fluid.
2. The stem shall be either 3.5” (90mm) or 6” (160mm) in length with a 1 ¼” – 18 UNEF
adjustable swivel nut and a separable 3/4” NPT threaded brass or lead free brass
thermowell. Thermowells to be stamped by the manufacturer with a batch code.
a. Lead Free thermowells to also be stamped LF where applicable. (TIM-LF)
3. Thermometer shall be fully adjustable and provide a full 360-degree positioning on a
vertical axis and lock in any position along its arc.
4. The scale to be of white painted aluminum with permanently painted black markings. The
scale is non-reflective and the lens is to be glass.
5. Accuracy to be +/- 1% of full scale.
6. The socket to be stamped with the manufacturer’s batch code.
7. The thermometer enclosure rating to be rated as IP54.
8. The manufacturer is to provide a 5 year product warranty.
9. Direct Reading liquid-in-glass thermometer to be Winters TIM or TIM-LF Series or
approved equivalent.