Submittal Sheet

Gauges
Tel: 1-800-WINTERS / www.winters.com WINTERS INSTRUMENTS
Contractor Gauge (PCT, PCT-LF)
1. The pressure gauge shall have a 4.5” (115mm) dial and constructed of a 304 stainless
steel case and ring. The dial shall be a white aluminum dish dial with black and red
markings.
2. The wetted parts shall be made of a brass socket, silver solder welds and a phosphor
bronze bourdon tube. The movement is made of brass.
a. Lead free wetted parts (socket, solder, tube and restrictor screw) to be specified as
required. (PCT-LF)
3. The process connection is 1/4” NPT lower mount with a removable restrictor screw in the
orifice.
4. The lens is acrylic and the pointer is made of anodized black aluminum.
5. Pressure gauge accuracy to be ±1% of full scale (ASME grade 1A); a zero-adjustment
screw is available on the dial.
6. The ambient or process temperature tolerance of the gauge shall be -40°F to 200°F
(-40°C to 93°C) and the enclosure rating is IP52.
7. Manufacturer’s Series or Model number to be marked on each dial (above the pointer)
and the socket to be stamped with the manufacturer’s batch code.
a. Lead Free products to also be marked LF where applicable. (PCT-LF)
8. The manufacturer is to provide a 5 year product warranty.
9. Pressure gauges to be Winters PCT or PCT-LF Series or approved equivalent.
Light Duty Economy Gauge (
PEM, PEM-LF)
1. The pressure gauge shall have a 1.5” (40mm), 2” (50mm), 2.5” (63mm) or 4” (100mm) dial
and constructed of a black steel case and steel ring. The dial shall be white aluminum
with black and red markings.
2. The wetted parts shall be made of a brass socket, silver alloy welds and a phosphor
bronze bourdon tube. The movement is made of brass.
a. Lead free wetted parts (socket, solder & tube) to be specified as
required. (PEM-LF)
3. The process connection is either 1/8” or 1/4” NPT lower or centre back mount.
4. The lens is polycarbonate for 1.5” (40mm), 2” (50mm) and 2.5” (63mm) dials or glass for
4” (100mm) dials and the pointer is made of black aluminum.
5. Pressure gauge accuracy to be ±3-2-2% of full scale (ASME grade B).
6. The ambient or process temperature tolerance of the gauge shall be -40°F to 150°F
(-40°C to 65°C) and the enclosure rating is IP52.
7. Manufacturer’s Series or Model number to be marked on each dial (above the pointer)
and the socket to be stamped with the manufacturer’s batch code.
a. Lead Free products to also be marked LF where applicable. (PEM-LF)
8. The manufacturer is to provide a 5 year product warranty.
9. Pressure gauges to be Winters PEM or PEM-LF Series or approved equivalent.