Installation & Assembly

Installation Instructions
Product Information
Installation Steps
1/2
Accessible Mirror Features:
- Full Length Piano Hinge
- Adjustable Tilt
- Stainless Steel Channel Framed Mirror
**Professional Installation is recommended to insure proper installation.
**Please do not stand your mirror on end while unboxing. Lie the wall mirror down mirror side up prior to
installation. Set on a clean surface, like a towel or carpet to avoid damage.
**Prior to discarding the packaging, locate hardware and screws where applicable.
NOTICE:
1. Do not install mirror with damaged or broken glass. Contact the point of sale for further instructions on
replacements.
2. The installation instructions provided are for typical drywall/wood stud type walls. Additional hardware
may/will be required for different wall types. Always make sure you adequately brace the mirror for secure
installation. Do not screw directly into drywall without proper bracing.
1. For secure application, locate the studs within the wall to mount the cabinet properly. If you cannot locate
the studs, you will need to purchase additional hardware to secure your cabinet to the wall and/or open
the wall to install additional bracing.
2. For plaster or drywall construction, provide backing in wall to comply with local building codes, then
secure the wall bracket with screws through mounting holes in concealed wall hanger. For other wall
surfaces, provide fiber plugs or expansions shields for use with screws, or provide 1/8” (3mm) toggle bolts
or expansion bolts.