Manualshelf

Assembly and Installation Instructions

ManualsBrandsWinston Porter ManualsCeiling LightsAbrahamson 9 - Light Shaded Tiered Chandelier
12
1. Attach the threaded pipe to the mounting strap, then
secure it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to the threaded pipe.
4. Adjust the arms of the main fixture according to the
drawing of the package.
Important:
a. The arms of each tier (bottom, middle)
should be positioned with equal distances
between them.
b. The arms should be fixed securely.
5. Secure the loop onto the stem of the upper fixture,
thread fixture wires through threaded end of loop
first.
6. Take an upper arm, attach its one end to lower arm,
secure it with a short bolt nut. See illustration for correct
position. (Don’t reverse two ends of upper arm.)
7. Secure upper fixture to main fixture, make sure the hole of upper fixture
aligns with the hole of upper arm by screwing loop. Then secure the other
end of upper arm with a long bolt nut. Secure the other upper arms.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Upper Fixture
Glass Shade
Socket Ring
Long Bolt Nut
Middle Arm
Short Bolt Nut
Lower Arm
Glass Holder
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Main Fixture
Stem
Stem
Socket
Upper Arm
Turn off the power at fuse or circuit box.
Installation Steps
6. Take one upper arm and place one end to a
lower arm, secure it by fastening the short bolt
nut. See illustration for correct position.
Repeat with the other upper arms.
8. Place the other end of upper arm to the upper fixture, secure it
by fastening the long bolt nut. See illustration for correct position. Repeat
with the other upper arms.
Loop Lock(K)
Loop Lock(K)
Outlet Box
House Grounding Wire
Wire Nut(E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(F)
Canopy(G)
Hex Nut(D)
Washer(J)
Collar(I)
Chain(L)
Loop
Bulb Type A Max.100W
(not included)
Top Loop(H)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Nut (E)
Canopy (G)
Top Loop (H)
Collar (I)
Threaded Pipe (F)
Washer (J)
Loop Lock (K)
Chain (L)

Summary of content (2 pages)